Taylor C850 Series Equipment Manual page 50

14. Spray a clean, sanitizer-soaked grill cloth once
with grill cleaner. Wipe the soiled side of the
release sheet until clean. See Figure 122.
Figure 122
15. Rinse with a separate clean sanitizer-soaked grill
cloth to rinse off the remaining grill cleaner.
Repeat for all of the release sheets. See Figure
123.
Figure 123
16. Remove rear grease guard and take to the
3-compartment sink to wash, rinse and sanitize.
See Figure 121.
Figure 124
17. Spray the upper platens with grill cleaner starting
with the sides and back. If you have three upper
platens, lower the middle platen first to easily
access the adjoining sides of the right and left
platens.
18. After spraying the sides, spray the surface of each
upper platen three times to cover the bottom,
middle and the top. See Figure 125.
19. Firmly attach the Cleaning Pad to the Kay Grill
Cleaning Pad Holder.
DO NOT use metal scrapers, abrasive pads,
screens, or wire brushes on the upper platens.
Damage to components may result.
20. Apply the grill cleaner to the platen surfaces,
starting from the right platen to the left platen.
21. Using the Kay Grill Cleaning Pad Holder,
distribute the grill cleaner around the upper platens
to ensure full coverage. See Figure 126.
48
Figure 125
Figure 126