Taylor C850 Series Equipment Manual page 47

43. Place the fan interlock switch in the OFF position
if the restaurant is closing: otherwise return it to
the appropriate setting for cooking. See Figure 109
Figure 109
44. Wash, rinse and sanitize the rear grease guard and
grease cans at the 3-compartment sink. Reinstall
the grease cans. See Figure 110.
Figure 110
45. Reinstall the rear grease guard. See Figure 111.
Figure 111
46. Bring the cleaning tools to the 3-compartment
sink. Rinse or launder the mop sock; then place it
in a clean sanitizer pail. Once the grill pad and
sock pad have cooled, remove then wash and rinse
thoroughly at the 3-compartment sink. Allow to air
dry.
47. Flip the grill pad over and replace on the tool for
the next grill cleaning.
48. Wash, rinse and sanitize all of the utensils and
tools used to clean the grill at the 3-compartment
sink. See Figure 112.
Note: Reverse the cooking side of the release
sheets on a daily basis (example: black side on odd
days; grey or brown side on even days).
49. Leave the upper platens in the OPEN position
overnight.
50. Place the fan interlock switch in the OFF position.
See Figure 113.
51. After the grill cleaning pad has cooled, remove it
from the pad holder. Wash and rinse it thoroughly
at the 3-compartment sink. Turn the grill pad over
and re-install it on the holder.
52. Wash, rinse, and sanitize all utensils and tools
used to clean the grill at the 3-compartment sink.
Cleaning Procedure - 24 Hour Stores Only
(Grills Using Lower Release Sheets)
1. Clean the grill using the Daily Cleaning
Procedures on pages 39 -45,
steps 1 - 52.
45
Figure 112
Figure 113