Data And Marking; Storage; Installation - Wega Atlas 2010 Use And Maintenance Manual, Instructions For The User

Data and marking

2.7
The machine technical data are listed in the follow-
ing table:
TECHNICAL DATA TABLE JUN
120
Voltage (V) 230-400
240
Frequency (Hz) 50/60
Max power (kW) 2.4 kW
Boiler (l) 5
Safety valve
calibration (bar)
Boiler operating
pressure
Feed water pressure
Coffee dispensing
pressure
Operation mode
temperature
Sound pressure level
According to the Directive 2006/42/EC, the machine is
marked with the CE marking, by which the manufacturer
declares, under its own responsibility, that the machine
is safe for people and things.
The CE nameplate is affixed to the base of the frame
under the drain pan on which the identification data is
reported. Below is an example of the nameplate:
MARCHIO COMMERCIALE
WEGA MACCHINE PER CAFFÈ S.r.l.
Via C. Bardini,1 SUSEGANA (TV) - ITALY
Tel. +39.0438.1799700 Fax +39.0438.1884890
S/N:
V
For any communication with the Manufacturer, al-
ways note the following information:
• S/N - machine serial number;
• Mod. - machine model
• Y - date of manufacture;
The data of the appliance can be seen also on the
label located on the package of the machine.
It is forbidden to remove or damage the nameplate. If it needs
replacing urgently, always exclusively contact the Manufacturer.
USER manual
1GR COMPACT 2GR
120 120 120
230-400 230-400 230-400
240 240 240
50/60 50/60 50/60
2.4/3.1/3.3 3.1 3.1/3.9/4.2
6/8 7 10.5/14
0,19 MPa (1,9 bar)
0,08 - 0,14 MPa (0,8 - 1,4 bar)
0,15 - 0,6 MPa max (1,5 - 6 bar max)
0,9 MPa (9 bar)
5 - 40°C 95° MAX R.U.
< 70 dB
Mod. Y
Hz
W
MADE IN ITALY
3GR 4GR
230-400 230-400
240 240
50/60 50/60
5.6/6.0 6.6/7.1
17/21 23
3.

STORAGE

The machine is stored by the Manufacturer or the
Distributor.
4.

INSTALLATION

The installation of the machine must be performed
only by the Manufacturer's Qualified Technicians.
During the installation the Qualified Technicians needs to renewal
operations of the water contained in the hydraulic circuits.
The base of the machine support must be perfectly level and
without irregularities.
The electric system must be equipped with a suitable differential
circuit breaker (30 mA).
ROSSO
C:0 M:100 Y:100 K:0
NERO
C:0 M:0 Y:0 K:100
VERDE
C:100 M:0 Y:100 K:0
The CE nameplate is fixed on
the base of the frame under
the drain pan.
45 216
of