Name And Function Of Each Part - Mitsubishi Electric Melsec Q Series User Manual

7 Setting and procedure for operation

7.3 Name and function of each part

Names and functions of parts of QE81WH are provided below.
(5) Push button
Use this button to
insert a cable to the
terminal or to remove
them.
(6) Check hole
Use this for continuity
check to the terminal.
Use it with a tester
contact.
Figure 7.3-1 Appearance of the module
7 - 3
(1)LED
Operation status of this
module is displayed.
(Refer to table.7.3-1.)
(2) Current input terminals
Connect the current wire of
the measuring circuit with the
secondary output of the
dedicated current sensor.
(3) Voltage input terminals
Connect the voltage input
wire of the measuring circuit.
(4) Strip gauge
A gauge that is used for
checking the length of
stripped wire.
QE81WH