Mitsubishi Electric Melsec Q Series User Manual page 91

7 Setting and procedure for operation
7.6.3 Parameter Setting
Set the parameters.
Setting parameters on the screen omits the parameter setting in a program.
(1)Setting procedure
Open the "Parameter" window.
Project window→[Intelligent Function Module]→Module name→[Parameter]
Figure 7.6.3-1 Dialog box to monitor all buffer memories (a case where the module is attached to the slot 0)
(2)Double-click the item to change the setting, and input the setting value.
 Items to input from the pull-down list
Double-click the item to set to display the pull-down list. Select the item.
 Items to input from the text box
Double-click the item to set, and input the setting value.
(3) Setup of CH2 to CH4 is performed by operation of Procedure (2).
7 - 19
QE81WH