Mitsubishi Electric Melsec Q Series User Manual page 98

7 Setting and procedure for operation
7.7.2 Setting the intelligent function of the module switch
(1) In the "I/O assignment" of 7.7.1, click the Switch setting button to display the dialog box of
"I/O module, intelligent function module switch setting".
(2) The intelligent function module switch setting displays switches 1 to 5; however, only the
switch 5 is used for this purpose. Switch setting is configured using 16-bit data.
Settings are as shown in Table 7.6.2-1
Swith
Switch name
No.
1 Not used
2 Not used
3 Not used
4 Not used
Test mode
5
transition
(3) When the setting is completed, click the Complete setting button.
(4) From the "Online" menu, select "Write to PLC" to display the dialog box of Write to PLC, and
then execute the writing to PLC parameter. After resetting the CPU module, the value will
become effective.
Figure 7.7.2-1 Dialog box to set the intelligent function of the module switch
Table 7.7.2-1 Setting the intelligent function of the module switch
-
-
-
-
0: Measuring mode (Even if it is not set, measuring mode is performed)
1: Test mode
* For details of test mode, refer to 4.2.5.
Description
7 - 26
QE81WH
Select "DEC.".