Restoring motorcycle operation via
the PIN code
In case of key acknowledgement system or key
malfunction, the instrument panel allows the user to
enter his/her own PIN code to temporarily restore
motorcycle operation.
If the PIN code has been activated via the "PIN Code"
function in the "Setting menu" page 147, the
instrument panel displays "Insert PIN" and next to it
the spaces for the four digits of the PIN.
Entering the code:
The 2 arrows above and below the digit indicate
●
that the number can be changed from 0 to 9
using buttons (1) and (2).
Press ENTER (3) to confirm and move on to the
●
following digit.
Repeat the procedure until entering all 4 digits.
●
Once the fourth digit is set, press ENTER (3) and the
instrument panel behaviour will be as follows:
if there is a problem during the PIN check, the
●
instrument panel displays an error for 2 seconds
and then passes to the main screen;
if PIN code is not correct, the instrument panel
●
displays "Wrong" for 2 seconds and then goes
Fig 52
1
2
3
Fig 53
77