Modify PIN
Use buttons (1) and (2) from the Interactive
●
Menu to select the "Setting menu" item and
press ENTER (3).
Select the "PIN Code" item and press ENTER (3).
●
Select the "Modify PIN" item and press ENTER
●
(3).
The display shows "Current PIN" on the left and the
first of the 4 digits active for the entry.
Entering the code:
The 2 arrows above and below the digit indicate
●
that the number can be changed from 0 to 9
using buttons (1) and (2).
Press ENTER (3) to confirm and move on to the
●
following digit.
Repeat the procedure until entering all 4 digits.
●
Once the fourth digit is entered, press ENTER (3) and
the instrument panel behaviour will be as follows:
If the entered PIN is correct, the display shows
●
"Correct".
If the PIN entered is incorrect, "Wrong" is
●
displayed and a new attempt to enter the
current PIN can be made.
If the PIN is correct, enter the new PIN.
150
Fig 119
Fig 120