Erase data
This item is only displayed if laps have previously
been recorded.
Use buttons (1) and (2) from the Interactive
●
Menu to select the "Setting menu" item and
press ENTER (3).
Select the "Lap" item and press ENTER (3).
●
Select the "Erase data" item and press ENTER
●
to erase the data.
The message "Wait..." is then displayed for a few
seconds (Fig 136), followed by the message "Erased"
for a few seconds. The previous screen will then be
displayed without the "Erase data" item.
160
Fig 135
Fig 136