Front Fork Adjusters - Ducati Supersport 950 Owner's Manual

Front fork adjusters

The Öhlins fork of the Supersport is fully adjustable
in rebound and compression hydraulic damping and
in spring preload.
It is possible to adjust the spring preload on both
legs, the compression and rebound can only be
adjusted on the LH and RH legs, respectively.
Adjustment is done by external screw adjusters:
In particular:
1) for rebound adjustment;
2) to adjust the preload of the inner springs;
3) to adjust the compression damping.
Position the motorcycle on its side stand so that it is
stable.
Turn the adjuster (1) at the top end of the RH fork leg
with a suitable screwdriver to adjust rebound
damping.
Turn adjuster (3) at the top end of the LH fork leg
with a screwdriver to adjust compression. By turning
adjuster screws (1) and (3) you will hear some clicks;
each click corresponds to a damping setting.
The stiffest damping setting is obtained with the
adjuster screws (1) and (3) turned fully clockwise to
the "0" position.
62
1 2
3 2
Fig 41
Fig 42