Ducati Supersport 950 Owner's Manual page 163

Start
Enter the SETTING MENU.
●
Use the navigation buttons to select "Tyre
●
calibration" option and press ENTER button.
Select the "Start" option and press ENTER
●
button.
When the calibration procedure starts, the
instrument panel displays the message "Ready" (A),
the message "Keep Speed" with speed range and the
gear to be maintained by the user to complete the
teach-in procedure. On the RH side is the reference
Riding Mode, current speed and gear engaged.
Important
The teach-in procedure is allowed only at a
vehicle speed between 48 Km/h (30 mph) and 52
Km/h (32 mph) in the 2rd gear.
When the rider complies with the required
conditions of speed and gear indicated, the
instrument panel starts system calibration: all
previous information will be displayed showing "In
progress" instead of "Ready".
Calibration is performed by keeping speed and gear
within the indicated range for 5 seconds.
162
A
The procedure can be aborted by holding depressed
the button (1) for a long time: in this case the
instrument panel shows all previous information,
replacing message "In progress" with message
"Aborted", followed by the previous menu after a few
seconds.
Fig 139