Setting menu - Riding Mode - DWC
This function allows setting the intervention level of
the DWC or deactivating it.
Use buttons (1) and (2) from the Interactive
●
Menu to select the "Setting menu" item and
press ENTER (3).
Select the "Riding Mode" item and press ENTER
●
(3).
Select the Riding Mode you wish to customise
●
and press ENTER (3).
Select the "DWC" item and press ENTER (3).
●
Levels from 1 to 4 and "Off" are displayed on the left-
hand side. While the currently set level is shown on
the right. The motorbike is shown in the middle with
the part involved in the setting highlighted and the
reference indications.
Use buttons (1) and (2) to scroll and select the desired
level. Press ENTER (3) to confirm and quit the
setting menu.
Attention
When the DTC is set to Off, the DWC is also
automatically set to Off, so both the wheelie control
and the vehicle dynamics stabilisation control are
deactivated.
136
1
2
3
Fig 103
Fig 104