By turning counter clockwise starting from this
position, count the clicks that will correspond to
positions "1", "2" etc.
To change preload of the spring inside each fork leg,
turn adjusters (2) with a hexagon wrench, completely
anticlockwise, to obtain fully uncompressed
position. From this position, adjust the spring
preload by turning the adjuster (2) clockwise. Every
turn corresponds to 1 mm (0.04 in) of spring preload.
STANDARD settings are as follows:
compression: 3 turns (from fully closed);
●
rebound: 3 turns (from fully closed);
●
spring preload: 5 turns (from fully unloaded).
●
Attention
Adjust both fork leg spring preload to same
settings.
61