Njoy Balder Series User Manual page 21

Fault code is shown as
UPS is overload too
43. The icon
OVER LOAD
long and becomes
lights on LCD display
fault. Then UPS shut
and alarm beeps
down automatically.
continuously.
Fault code is shown as
The UPS shut
down automatically
14, the icon
SHORT
because short circuit
lights on LCD display,
occurs on the UPS
and alarm beeps
output.
continuously.
A UPS internal fault
has occurred. There
are two possible
Fault code is shown
results:
as 1, 2, 3, 4, 11, 12,
1. The load is still
13, 14,1A, 21, 24, 35,
supplied, but directly
36, 41, 42 or 43 on
from AC power via
LCD display and alarm
bypass.
beeps continuously.
2. The load is no
longer supplied by
power.
Batteries are not fully
Battery backup time is charged.
shorter than nominal
value.
Batteries defect.
Fan is locked or not
The icon and
working; or the UPS
flash on LCD display
temperature is too
and alarm beeps every
high.
second.
40
Remove excess loads from
UPS output and restart it.
Check output wiring and if
connected devices are in
short circuit status.
Contact your dealer.
Charge the batteries
for at least 7 hours and
then check capacity. If
the problem still persists,
consult your dealer.
Contact your dealer to
replace the battery.
Check fans and notify
dealer.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with
separate collection systems)
This symbol on the product or on its packaging indicates that this product shall
not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling
of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
The recycling of materials will help to conserve natural resources.