GASLAND chef Pro Series Installation Instruction page 8

06
Note
: On models with light-colored glass cooktops, it is normal for the cooking
zones to change color when hot or cooling down. This is temporary and will
disappear as glass cools to room temperature.
The surface element will cycle on and off to maintain your selected control setting.
It is safe to place hot cookware (from the oven or surface) on the glass cooktop
when the surface is cool.
Even after the surface elements are turned off, the glass cooktop retains enough
heat to continue cooking.
To avoid overcooking, remove pans from the surface elements when the food is
cooked.
Avoid placing utensils that could become hot or plastics that could melt on the
surface element until it has cooled completely.
• Always center the pan on the surface element you are using.
• Never cook directly on the glass. Always use cookware.
• Water stains (mineral deposits) are removable using the cleaning cream or full
strength white vinegar.
• Use of window cleaner may leave an iridescent film on the cooktop. The clean-
ing cream will remove this discoloration.
• Don't store heavy items above the cooktop. If they drop onto the cooktop, they
can cause damage.
• Do not use the surface as a cutting board.
• Do not slide cookware across the cooktop because it can scratch the glass. The
glass is scratch-resistant, not scratch proof.
Surface elements cycle on and off
Surface elements will cycle on and off to maintain the temperature you have
selected.
All radiant surface elements have a temperature limiter that protects the glass
cooktop from getting too hot.
The temperature limiter may cycle the elements off while cooking if :
• The pan boils dry.
• The pan bottom is not flat.
• The pan is off-center.
• There is no pan on the element.
1 (844) 538-7890
support@gaslandchef.com
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418