GASLAND chef Pro Series Installation Instruction page 17

Important:
The junction box must be located where it will allow considerable slack in the
conduit for serviceability.
2. Protect surface of cooktop
Place a towel or tablecloth onto the countertop. Lay the cooktop upside down
onto the protected surface.
3. Attach foam tape
Apply the foam tape around the outer edge of the glass. Do not overlap the
foam tape.
4. Locate mounting parts
On the underside of the cooktop, you will find the hex screws. Remove and use
these hex screws to mount the brackets at these two locations. Do not tighten.
Turn the bracket inward to avoid interference when dropping the cooktop into
the countertop.
1 (844) 538-7890
support@gaslandchef.com
Bottom of Cooktop
Cloth under Cooktop
Bottom of Cooktop
FoamTape
Foam Tape
Cooktop Glass
Hex Screws
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
15