GASLAND chef Pro Series Installation Instruction page 18

16 17
5. Insert cooktop into cutout
Insert the cooktop centered into the cutout opening. Make sure the front edge
of the countertop is parallel to the cooktop. Make final check that all required
clearances are met.
6. Attach hold-down brackets to cabinet
Open the cabinet door. Rotate the brackets to overlap with the underside of the
countertop. Then tighten the hex screw. Install the thumbscrew until it touches
the bottom of the countertop.
Important
: Turn the thumbscrew until it touches the bottom of the countertop. Do
not overtighten.
1 (844) 538-7890
support@gaslandchef.com
Countertop
Bracket
Thumbscrew
Cooktop
Cooktop
Cooktop Base
Hex Screw
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418