Remote Controller Features - UBSAN ZINO PRO+ User Manual

2.2 Remote Controller Features

S/N Key / Switch
(1) Throttle / Rudder
Stick
(2) Elevator / Aileron
Stick
1 Throttle / Aileron
Stick
2 Elevator / Rudder
Stick
3 Return to Home
4 Power Switch
5 Auto Takeoff /
Land
6 Normal / Sport
Mode
7 Power Status
LEDs
8 Photo
9 Video
10 Gimbal Adjustment
Wheel
11 Remote control
charging / patch
cord interface
Push the stick forward or backward and the quad
copter will fly forwards or backwards (respectively).
Push the stick left or right and the quadcopter will
rotate counterclockwise or clockwise (respectively).
Push the stick forward or backward and the quadcopter
will ascend or descend (respectively). Push the stick left
or right and the quadcopter will fly left or right
(respectively).
Push the stick forward or backward and the quadcopter
will fly forwards or backwards (respectively). Push the
stick left or right and the quadcopter will fly left or right
(respectively).
Push the stick forward or backward and the quadcopter
will ascend or descend (respectively). Push the stick left
or right and the quadcopter will rotate
counterclockwise or clockwise (respectively).
Long press to enter the return mode, short press
to exit one button to return to the air;
During the flight, the re mote control "Beep...
Beep..." prompt (once every three seconds) (RTH in
the aircraft GPS normal and search.
Can only be enabled when there are 6 or more
stars)
Long press to power on or off
Long Press to auto takeoff or land.
Normal mode (left): The aircraft flies at the
maximum speed set by the APP
Expert mode (right): The maximum flight speed of
the aircraft is 10m/s
The 4 LEDs are battery indicators. Each LED represents
25% of the battery.
Short press to take photos.
Long press to start recording, short press to end
recording
Controls the angle of the gimbal.
(1) Remote control charging interface
(2) Mobile device patch cord interface
10
Function