4. Start binding (This step is only required when first binding or replace the
transmitter, do it manually.)
1.
Go to APP - Setting - Controller, transmitter connection method: Synchleas
2.
Using a pin to long press the aircraft bind button to enter binding mode.
3.
Select "Set transmitter and aircraft connection" and scan aircraft.
4.
Select the aircraft and connect.
You have to complete the binding process on APP when first use or replace the
transmitter, and then you can fly the aircraft with the transmitter directly without
connecting to the APP.
Tips:
- The binding process has been completed in the factory. Generally, user only need to do
the first 3 steps.
- After entering binding mode, all 4 LEDs flash rapidly and become solid after binding
successfully.
- Please keep the distance between the aircraft and transmitter within 1 meter when
binding.
14