Table of Contents
Advertisement
Make sure that the propellers are installed in the correct positions (A to A, B to B). Otherwise,
the aircraft will not be able to fly normally.
Since the propeller blades are thin and somewhat sharp, it is recommended that users wear
gloves during installation to prevent accidental injury.
1.4 Aircraft LED indications
The H216A has 4 LEDs; the fore/frontal LEDs are blue and the rear LEDs are red. The LED
status indications are defined as follows:
Function
Power on and start up
Calibrate Compass 1
Compass
Calibration
Calibrate Compass 2
Horizontal Calibration
Flight mode
Headless mode
Return to Home
Low power
Flight control connection status
2 The HT009 Remote Control/Transmitter
The HT009 is a Bluetooth transmitter fully outfitted for use with the H216A aircraft and its various
functions. Experience real-time video transmission through the X-Hubsan app on a mobile device
equipped with a high definition screen.
2.1 The HT009 Remote Control/Transmitter
8 Photo
9 Video
key
key
LED status indication
All 4 LEDs flash simultaneously
All 4 LEDs flash clockwise
LEDs flash in vertical pairs, alternately
All 4 LEDs flash simultaneously
All 4 LEDs are solidly lit
Fore LEDs slowly flash blue and rear LEDs are solid red.
Fore LEDs are solid blue and rear LEDs slowly flash red.
Fore/frontal blue LEDs stay solidly lit and the rear red LEDs flash rapidly
When the aircraft is not connected to a transmitter or has been disconnected
from a transmitter, the fore LEDs will flash blue. Upon connection with a
transmitter, the fore LEDs will turn solid.
10 Camera head adjustment key
(Temporarily no function)
08
Battery compartment
Advertisement
Table of Contents
