Related Manuals for UBSAN H507A
Summary of Contents for UBSAN H507A
- Page 1 ® G P S WAY P O I N T X 4 S TA R W I T H A P P H 5 0 7 A PLEASE READ THE INSTRUCTION MANUAL CAREFULLY...
-
Page 2: Safety Notes
IMPORTANT SAFETY NOTES OPERATION: Be extremely careful and responsible when using the Quad. Small electronic components can be damaged by crashes or by dropping into water. To avoid any injuries, do not use the quad with broken or damaged components. Maintenance: Do not try to fix the quad by yourself, please contact Hubsan directly or distributors authorized by Hubsan for customer service. - Page 3 Safety Advisory Notice for Lithium-Polymer (LIPO) Batteries LiPo batteries are different from conventional batteries in that their chemical contents are encased in a relatively lightweight foil packaging. This has the advantage of significantly reducing their weight but it does make them more susceptible to damage if roughly or inappropriately handled.
-
Page 4: Table Of Contents
3.Quad Battery 3.1 Introduction 3.2 Installation 3.3Charging 4.Propeller 4.1Introduction 4.2Installation 5.X-Hubsan APP 6.Start to Fly 6.1Flight Environment 6.2Safety Checks before flying 7.APP Flight 7.1 Connect with APP 7.2Compass Calibration 7.3Map Mode 7.4Basic Flight EXPLODED VIEW H507A TROUBLESHOOTING H507ASPARE PART CHART... -
Page 5: Introduction
INTRODUCTION Thank you for buying the HUBSAN product. It is designed as an easy-to-use,multi-functional RC model, capable of hovering and acrobatic flight maneuvers. Please read the manual carefully and follow all the instructions. Be sure to keep the manual for future reference. Quadcopter Weight: 162g（including propeller guard）... -
Page 6: Led Indicator Status
2. QUAD COPTER MOTOR LED INDICATOR Indicator Status: Front LED is blue; Back LED is red. 1.Power on: 4 LED indicators blink simultaneously 2.Compass Calibration: 1）Horizontal calibration: 4 LED indicators blink circularly. 2）Vertical calibration: 4 LED indicators blink alternately. 3.Quadcopter Calibration：4 LED indicators blink slowly. 4.GPS Flight: 4 LED indicators remain lighted. -
Page 7: Installation
4.2 Installation Attach the propellers to the corresponding motors that are marked with A and B,tighten the propellers and keep the motors deadlocked with the screw-driver. Black Screw Silver Screw 黑色螺丝 银色螺丝 “I”Mark Tighten the propeller A with black screw; Tighten the propeller B with sliver screw. -
Page 8: Start To Fly
For iPhone or iPad, please select【 Settings 】>Wi-Fi; For Android system,please select【 Settings 】>WLAN> Wi-Fi. (3).Click Hubsan_h507a_XXXXXX,and password is 12345678.The password cannot be changed by user. (4).Connection completed (5).Open X-Hubsan APP, choose Hubsan H507A to enter the user interface for flight. -
Page 9: Compass Calibration
NOTICE： For safety,please don't use the smart device for other purposes while it is connected with Hubsan App.If you want to control the quad with other devices, please restart the quad. 7.2 Compass Calibration Compass calibration is required for the first use, otherwise the quad can't work properly. -
Page 10: Exploded View
EXPLODED VIEW... - Page 11 Part Name Part Name H502S Motor B Propeller A H502S Motor A Propeller B Blue LED 5.8 GHz Transmission Module Red Led Screw Compass Module Signal Isolation Membrane Main Control Board Upper Body Shell Screw Lower Body Shell Screw Screw Battery Compartment Lampshade Screw...
-
Page 12: H507A Troubleshooting
H507A TROUBLESHOOTING 1. No GPS Signal ！ Be sure it's for outdoors flight, and the flight environment should be open without tall buildings. 2. Altitude Hold & Positioning not work! Check if the quad is with more than 6 GPS satellites or not. -
Page 13: H507Aspare Part Chart
H507A SPARE PART CHART H507A-01 H507A-02 H502C-02 H507D-02 H502C-03 Body Shell Lamp Base A/B Lamp Base A/B Lamp Base A/B Screw Transparent yellow Grey Brown H507A-03 H502S-03 H502E-03 H507D-03 H502-05 Propeller A/B Propeller A/B Propeller A/B Propeller A/B Motor A... - Page 14 FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 15 ® www.HUBSAN.com Hubsan Technology Company Limited...