UBSAN ZINO PRO+ User Manual page 23

Waypoint Planning: You can preset the waypoint parameters such as the number of
waypoints, the altitude of each waypoints and other parameters. The aircraft will follow
the preset parameters after you activate waypoint mode. You can control the flying
speed during flight or you can pause or resume the Waypoint mode.
Waypoint Memory: After entering the mode, fly the aircraft and tap on "Memorize
Waypoints" on the APP and the aircraft will mark the location. After memorizing all the
waypoints, upload and execute, then the aircraft will fly according to the memory.
If the aircraft is not in the starting position, the aircraft will fly to the starting position
before starting this function.
4.5.6 Line Fly Mode
Tap on "Mode Selection" then "Line Fly Mode". Set the angle, distance and speed of the
aircraft.
Performance requirements:
1. Set the angle (0 ~ 360 °, accuracy 1 °); Set the distance (10-100 meters, accuracy 1
meter); set the speed (1-12 m / s, accuracy 0.1);
2. Once setup is complete, the aircraft will execute Line Fly mode.
During the flight, pilots can take photos or videos manually, or pause / resume / stop the
flight at any time.
During the flight, the throttle stick is co ntrollable and the other directions are
uncontrollable;
3. You can pause/resume/stop the flight at any time.
4. When the aircraft is low on battery or lost connection, the aircraft will always set
Return to Home as the priority mission.
23