Sargent Assa Abloy 9900 Installation Instructions

Installation Instructions
9900 & 12-9900
Mortise Lock Exit Device
See Figure 1 for identification of parts.
Review the dimensions on the template to obtain the correct
height from finished floor.
1. Locate and place template as follows:
a. Stick center case and lock front template on door as
illustrated in Figure 2.
b. Using the cross bar hole centers for measuring, locate
the vertical center line of bracket.
Figure 2
2. Drill holes and mortise for lock as directed by the templates. See Figure 3.
3. If screwless rose outside trim is used, see separate instruction sheet and install rose at this time.
See Figure 4.
4. Fasten mortise lock in place. See Figure 5.
1-800-727-5477 • www.sargentlock.com
Copyright © 2018, 2021 SARGENT Manufacturing Company. All rights reserved. Reproduction in
whole or in part without the express written permission of SARGENT Manufacturing Company is
prohibited.
Figure 5
A5572F 4/21
Figure 1
Figure 3
Figure 4