Feider Machines FPB1200 Instruction Manual page 5

using this machine in addition to using the dust extraction facility.
Hold the machine correctly using two hands and adopt a stable stance, make

sure that the mains cable is prevented from coming into contact with the
machine or getting caught up on other objects preventing completion of the
sanding pass.
This tool is intended to remove surface material using an abrasive medium.

Ensure that you have removed foreign objects such as nails and screws from

the workpiece before commencing sanding.
Do not use it for wet sanding, for dry sanding only.

Where possible, secure smaller workpieces to prevent them from moving

under the sander.
Do not force the sander, let the tool do the work at a reasonable speed.

Overloading will occur if too much pressure is applied and the motor slows
resulting in inefficient sanding and possible damage to the sander motor.
Do not use the dust collection box when sanding metal. The hot metal

particles could cause residual wood dust or the internal filter paper to catch
fire.
Do not continue to use worn, torn or heavily clogged sanding belts.

Do not touch the moving sanding belt.

If the replacement of the supply cord is necessary, this has to be done by the

manufacturer or his agent in order to avoid a safety hazard;
5