APRILIA RS 660 2020 Manual page 69

4.2) Units (Units)
This menu allows you to change the settings for displaying the units and is divided as
follows:
4.2.1) Speed (Speed)
4.2.2) Fuel consumption (Fuel consumption)
4.2.3) Temperature (Temperature)
4.2.4) Pressure (where applicable)
02_84
Press MODE SET briefly to go back to the "Dashboard" menu.
4.2.1) Speed (Speed)
This function may be used to change the unit of measurement used for speed.
Press MODE RIGHT briefly to highlight the menu option "Speed" in red and use the
MODE UP or MODE DOWN buttons to change the unit of measurement.
Press the MODE RIGHT selector again to confirm the new value and exit edit mode.
Press MODE SET briefly to go back to the "Dashboard" menu.
NOTE
02_85
IF THE UNIT OF MEASURE SET AT THE FACTORY HAS BEEN CHANGED, THE
SPEED'S UNIT OF MEASURE WILL FLASH FOR 30 SECONDS EACH TIME THE
KEY IS ENGAGED.
69