(HIGH BEAM HEADLIGHT)
•
Working from underneath the headlamp unit, turn the adjuster screw (3).
TIGHTEN (clockwise) to lower the light beam; LOOSEN (anticlockwise) to
raise the beam.
•
This adjuster screw may be used to adjust the vertical alignment of the high
beam headlight beam.
NOTE
CHECK THAT THE VERTICAL ALIGNMENT OF THE BEAM IS CORRECT.
04_32
Rear optical unit
CAUTION
THE TAIL LIGHT ASSEMBLY MUST BE REMOVED, CHECKED AND, IF NECES-
SARY, REPLACED BY AN Authorised Aprilia Dealer.
Rear turn indicators
NOTE
FOR REMOVING, CHECKING AND REPLACING THE REAR INDICATORS,
PLEASE SEE AN Authorised Aprilia Dealership
166