APRILIA RS 660 2020 Manual page 30

Longer pressure on the high beam flasher switch, or when the speed returns to zero,
the measurement is annulled, and the last measurement is shown on the display.
Timekeeping starts again following the steps described above.
After 50 counts the acquisition of new counts will overwrite the first acquisition. A new
measurement session without them being overwritten can only start when the previous
measurements are deleted using the MENU on the advanced functions on the instru-
ment panel.
When the vehicle is stationary with the lap timer paused, the number of LAPS com-
pleted may be viewed by pressing MODE RIGHT briefly.
Press MODE UP or MODE DOWN briefly to scroll up or down through recorded LAP
times.
Press and hold MODE UP or MODE DOWN to skip directly to the first LAP or the last
LAP time recorded.
Press and hold MODE RIGHT to return to the RACE screen.
NOTE
PRESS AND HOLD MODE RIGHT TO CANCEL THE INDIVIDUAL LAP TIME HIGH-
LIGHTED.
MAINTENANCE ICON
When a maintenance interval threshold is exceeded, an icon with a spanner is shown.
This indicator may be reset once the scheduled service has been completed by an
authorised Aprilia Dealer or service centre.
02_12
30