Alarms - APRILIA RS 660 2020 Manual

RIDING MODE SETTING SCREEN
From ROAD and RACE modes, a specific screen for setting the parameters of the
riding mode may be accessed by pressing and holding the "RIDING MODE" button
on the right hand handlebar control set.
See the paragraph "a-PRC system" for instructions on modifying parameters.
Press RIDING MODE or MODE SET briefly to exit the setting mode screen.
02_18

Alarms (02_19, 02_20, 02_21, 02_22, 02_23, 02_24, 02_25, 02_26,

02_27, 02_28, 02_29)
In the event of a fault, the digital display will show the cause.
Take your vehicle as soon as possible to an Authorised Aprilia Dealer.
SERVICE ALARM
In case of failure found in the dashboard or in the electronic control unit, the dashboard
signals the failure by displaying the word SERVICE and the red general warning light
turns on.
02_19
If there is an immobilizer failure at ignition, the dashboard requests you to enter a user
code. If the code is entered correctly, the dashboard signals the failure by displaying
the word SERVICE and the red general warning light turns on.
URGENT SERVICE ALARM
A serious failure is signalled by a fast flashing (two flashes per second) of the general
warning light and by the words URGENT SERVICE on the digital display. Take your
vehicle as soon as possible to an Authorised Aprilia Dealer. In these cases, the control
unit activates a safety procedure that limits the vehicle performance so that the rider
is able to reach an Authorised Aprilia Dealer at low speed. Depending on the type of
02_20
failure, performance can be limited in three ways: a) by reducing the maximum torque
33