WARNINGS AND IMPORTANT INFORMATION
MANDATORY INSPECTION PRIOR TO INSTALLATION
Immediately report any damage or discrepancies to your appliance supplier. This appliance
WARNING
has been inspected and tested at the time of manufacture and packaging, and was released for
transportation without known damage. Upon receipt, inspect the exterior for evidence of rough
handling in shipment. Ensure that the appliance is labelled correctly for the gas, electrical supply,
or other services it is intended to be connected to.
For safety and warranty purposes, appliances that may be damaged or incorrect MUST NOT be
installed or operated under any circumstances. No responsibility will be accepted for installation
or operation of damaged or incorrect appliances. Installation of damaged or incorrect appliances
may also contravene local regulations.
MODELS COVERED IN THIS MANUAL
Brivis Contour Series*
IMPORTANT
Brivis Promina Series
Brivis Advance Series*
Brivis AD Series
Brivis AD BAL Series
* Brivis Contour and Brivis Advance are fitted with a Motorised Winter-Seal.
A NOTE ON ILLUSTRATIONS
The illustrations used in this manual are for explanatory purposes only and the shape of your unit
NOTE
may vary slightly from that which is shown in this manual.
Brivis
L37
L47
P36
P46
F36DS
F46DS
6
L57
L67
P56
P66
F56DS
F66DS
AD66D
AD56D
AD66D
L77
P76
F76DS
F86DS
AD86D
Evap AC IM