Rinnai T Series Operation Manual

Rinnai T Series Operation Manual

Split type wall mounted air conditioner

Advertisement

Quick Links

Models
System
| HSNRT25B
Indoor
| HINRT25B
Outdoor
| HONRT25B | HONRT35B | HONRT50B | HONRT70B | HONRT80B
T Series Split Type Wall Mounted Air Conditioner
Operation Manual
| HSNRT35B
| HSNRT50B | HSNRT70B
| HINRT35B
| HINRT50B
| HSNRT80B
| HINRT70B
| HINRT80B
REFRIGERANT
R32

Advertisement

Table of Contents
loading

Summary of Contents for Rinnai T Series

  • Page 1 | HSNRT35B | HSNRT50B | HSNRT70B | HSNRT80B Indoor | HINRT25B | HINRT35B | HINRT50B | HINRT70B | HINRT80B Outdoor | HONRT25B | HONRT35B | HONRT50B | HONRT70B | HONRT80B T Series Split Type Wall Mounted Air Conditioner Operation Manual...
  • Page 2 OH&S requirements This appliance must be installed, maintained and removed only by an Authorised Person. For continued safety of this appliance it must be installed and maintained in accordance with the manufacturer’s instructions. REFRIGERANT Rinnai Split AC OM...
  • Page 3: Table Of Contents

    Service Maintenance Schedule - Non Ducted Air Conditioning Systems ��������������������������������������������������������� 16 General Maintenance ��������������������������������������������������������������������������������������������������������������������������������������� 17 Cleaning the Air Filter ��������������������������������������������������������������������������������������������������������������������������������������� 17 Save a Service Call ������������������������������������������������������������������������������������������������������������������������������������������ 18 When to Call for Service ����������������������������������������������������������������������������������������������������������������������������������� 18 Warranty Contacts Rinnai Split AC OM...
  • Page 4: Warnings And Important Information

    Read the OPERATING INSTRUCTIONS carefully before operation. Service personnel are required to carefully read the OPERATING INSTRUCTIONS and INSTALLATION MANUAL before operation. Further information is available in the OPERATING INSTRUCTIONS, INSTALLATION MANUAL, and the like. Rinnai Split AC OM...
  • Page 5 The table below indicates the temperature ranges the air conditioner can be operated within. MODE Cool Mode Heat Mode Dry Mode Room Temperature > 17°C < 27°C > 17°C Outdoor Temperature -15°C ~ 52°C -15°C ~ 24°C -15°C ~ 52°C Rinnai Split AC OM...
  • Page 6: Air Conditioner Basics

    The remote control may operate other electronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner. NOTE For proper operation, use a soft cloth to clean the signal transmitter LED and the receiver window. Rinnai Split AC OM...
  • Page 7: Remote Control Layout

    ROOM° C used for an extended period of time. DISPLAY CLEAN FRESH 18� SPOT SWING button Sets a fixed direction for air flow horizontally. SPOT SWING 19� ECO button Sets appliance to the most efficient operation. 20� Wireless Transmitter LED 21� LCD screen Advanced Displays settings and operation modes� Operation 22� Blank buttons Buttons Not used� Rinnai Split AC OM...
  • Page 8: Basic Operation

    The fan speed can be adjusted manually or set to automatic� 1� Press  the  "FAN"  button  until  the  desired  fan  speed  is  shown  on  the  LCD  AUTO screen (displayed below the temperature display), the available fan speeds  SPEED SPEED are AUTO / low (2 bars) / medium (4 bars) / high (6 bars). Medium Select "AUTO" if you wish the fan speed to be adjusted automatically by the  High Auto appliance� Rinnai Split AC OM...
  • Page 9: Adjusting Vertical Air Flow

    Repeat the above steps to further adjust the flow direction or press the "SWING ↔ " button once to a return 3� to a continuous cyclic movement of the vanes. When cycling, "SWING ↔ "  and the swing icon are shown on  the LCD screen� DO NOT attempt to adjust the air deflector vanes manually as this can result in damage to the louvre movement mechanisms. CAUTION Rinnai Split AC OM...
  • Page 10: Advanced Operation

    Press the "ON/OFF" button to turn on appliance� AUTO SPEED 2� Press the "MODE" button until "FAN" is shown on the LCD screen. 3� Press the "SPEED" button until the desired speed is shown on the LCD screen  Medium (the available fan speeds are low (2 bars) / medium (4 bars) / high (6 bars). High In this mode, Swing operations for air direction can still be adjusted, however the AUTO setting for the fan speed is not available. NOTE Rinnai Split AC OM...
  • Page 11: Turbo

    Attempting to alter the fan speed during Quiet mode operation will cancel this mode and return the appliance to manual operation. NOTE HEALTH (WI-FI) When pressed 8 times in quick succession, this button activates and or resets the Wi-Fi module of the appliance. The appliance will respond with a double beep to confirm Wi-Fi activation or reset. For further details refer to the Wi-Fi Operation Manual, a copy of the manual may be downloaded from the Rinnai  web site: http://www.rinnai.com.au/cooling/ SLEEP MODE 1� Press the "ON/OFF" button to turn on appliance� COOL COOL 2�...
  • Page 12: Delay On Timer

    POWERCON iFEEL 2� To display the current room temperature/active Follow Me function, press the  "ROOM °C" button once� 3� "ROOM" & “iFEEL” are shown on the LCD screen and the temperature digits  display the current room temperature at remote control location� Pressing  the  “ROOM”  button  again,  to  deactivate  this  function.  The  temperature  digits  display  the  current  set  temperature� Rinnai Split AC OM...
  • Page 13: Large Temperature Display

    DO NOT attempt to adjust the air deflector louvre manually as this can result in damage to the louvre movement mechanisms. CAUTION ECONOMY (COOLING ONLY) COOL In this mode the appliance automatically sets the operation to achieve the most  economical cooling of the room� SPEED SWING LRSWING POWERCON iFEEL Rinnai Split AC OM...
  • Page 14: Cleaning Operation

    Return the cover to the closed position� 4� To turn off, repeat steps 1 through 3. POWER INTERRUPTION AUTOMATIC RESTART Should a power outage occur while the appliance is operating, when the power is restored the system will restart  automatically using the same settings as those that were set before the power outage. After power restoration, the automatic restart cycle will take approximately 5 minutes. DO NOT adjust setting during the restart cycle period. NOTE Rinnai Split AC OM...
  • Page 15: Care & Maintenance

    ________________________________________________________________ ________________________________________________________________ CUSTOMER CARE PROGRAM Please ensure you register your product warranty on line at rinnai.com.au. The Rinnai Customer Care Program is designed to help you get the most out of your new system.  Service  and  maintenance  in  accordance  with  the  Service  Maintenance  Schedules  on  page  16  is  essential  in  ensuring  the  prolonged  useful  life  of  your  system,  and  help  ensure  it  operates  at  optimum  efficiency.  We  may ...
  • Page 16: Service Maintenance Schedule - Non Ducted Air Conditioning Systems

    CARE & MAINTENANCE SERVICE MAINTENANCE SCHEDULE - NON DUCTED AIR CONDITIONING SYSTEMS Your Rinnai Air Conditioning System should be maintained annually after the date of installation by a qualified  licensed technician in accordance with the Schedule below. Failure to do so during the product warranty period  may void your warranty. This periodic service and maintenance will prolong the useful life of the unit, and help  keep it running safely and at optimum efficiency. Date of Installation    /           / Installed By: Service Year  Service Date   /           /   /           /   /           /   /           /   /           /   /           / Service Company / Technician Ambient Temperature at CDU (°C) ELECTRICAL Wiring, Electrical connections Fan Motors  Capacitors (if applic) Printed circuit boards MAJOR COMPONENTS Outdoor unit clearances Outdoor unit condensate tray Outdoor unit condensate drain Outdoor unit fixing Indoor unit condensate tray Indoor unit condensate drain / pump...
  • Page 17: General Maintenance

    6� Ensure to re-insert the filter securely after cleaning, observing the same orientation as when removed. Failure to clean the filters regularly can cause condensation to form and drip from the indoor unit when operated in cooling mode during humid conditions. NOTE If you need more filters, please contact Rinnai. Rinnai Split AC OM...
  • Page 18: Save A Service Call

    Remote control does not operate the Check  for  interference  or  obstructions  that  may  be  blocking  the  indoor unit� remote control signals, if interference or obstructions are not responsible then contact Rinnai� The air conditioner stops running� Check power supply or contact Rinnai. If a power failure has occurred. Turn off the air conditioner when a  power failure occurs. When the power is restored, wait 3 minutes, ...
  • Page 19: Warranty

    “Authorised Service Representative” means an independent service contractor authorised by Rinnai or Rinnai service personnel� “Rinnai” means Rinnai Australia Pty Ltd (ABN 74 005 138 769) and any related company� “Certificate(s) of Compliance”  means  certificate(s)  issued  by  licensed  personnel  (including  plumbers, ...
  • Page 20 2�7 Rinnai will reimburse any reasonable costs associated with making a legitimate warranty claim against Rinnai  which are not otherwise specified above. 2�8 The Warranty of the Product requires that, in addition to all other conditions, the Purchaser conducts regular  and/or preventative maintenance as may be specified by the Operating/Installation Instructions or otherwise  directed  by  Rinnai  and  required  by  the  level  of  usage  and  the  usage  environment,  including  the  use  of  correct and uncontaminated refrigerants and lubricants. Refrigeration, plumbing and electrical works must be  undertaken by licensed personnel. 2�9 Where a Product or failed component is replaced under warranty, the time remaining on the original Product  warranty  period  will  continue  to  apply  and  the  replacement  product  or  part  will  be  subject  to  the  original ...
  • Page 21 3�2 This document (and any statutory consumer guarantees) represents the only Warranty given by Rinnai in respect of the Product.  No other person or organisation is authorised to offer any alternative warranty on  behalf of Rinnai� 3�3 If  the  date  of  purchase  cannot  be  established  to  Rinnai’s  satisfaction,  the  date  shall  be  deemed  to  be  2  months after the date of manufacture or the date of sale by Rinnai, whichever is the latter. 3�4 This warranty applies to Products which are manufactured on or after the date of publication of this warranty ...
  • Page 22 TRAVEL, TRANSPORT & ACCESS COSTS 6�1 The  Purchaser  must  pay  freight  charges,  in-transit  insurance  expenses  and  travelling  costs  for  repairs/ replacements under this Warranty, that are required to be performed 50km from the nearest Rinnai branch or  Authorised Service Representative� 6�2 Subject to clause 6.3, Rinnai will pay freight charges, in-transit insurance expenses and travelling costs for  repairs/replacements that are required to be performed less than 50km from the nearest Rinnai branch or  Authorised Service Representative, subject to the following: a) Rinnai will arrange for such repairs/replacements and make any payment directly to the third party to  provide the freight, in-transit insurance or travel services; or b) if Rinnai considers appropriate, it will authorise the Purchaser in writing to pay for the relevant freight ...
  • Page 23 The benefits provided by this Warranty are in addition to any other rights and remedies available to a consumer  under the New Zealand Consumer Law and any other law which may apply to the goods and or services. Warranty summary DEFINITIONS The terms listed below shall have the following meanings:  “Authorised Service Agent” means an independent service contractor authorised by Rinnai or Rinnai service personnel� “Rinnai” means Rinnai New Zealand Ltd (Company Registration Number 94694) and any related company.  “Certificate(s)  of  Compliance”  means  certificate(s)  issued  by  licensed  personnel  (including  plumbers,  refrigeration mechanics, electricians or other relevant tradespeople) to certify that any prescribed works comply  with applicable regulatory requirements.  “Certificate(s) of Occupancy”  means  certificate(s)  issued  by  the  local  government  authority  (or  similar ...
  • Page 24 Rinnai Authorised  Service Agents,  associated  with  a  Product  which is determined upon inspection not to be covered by this warranty.  2�7 The Warranty of the Product requires that, in addition to all other conditions, the Purchaser conducts regular  and/or preventative maintenance as may be specified by the Operating/Installation Instructions or otherwise  directed  by  Rinnai  and  required  by  the  level  of  usage  and  the  usage  environment,  including  the  use  of  correct and uncontaminated refrigerants and lubricants. Refrigeration, plumbing and electrical works must be  undertaken by licensed personnel.  2�8 Where a Product or failed component is replaced under warranty, the time remaining on the original Product ...
  • Page 25 Product.  No  other  person  or  organisation  is  authorised  to  offer  any  alternative  warranty  on  behalf of Rinnai� 3�3 If  the  date  of  purchase  cannot  be  established  to  Rinnai’s  satisfaction,  the  date  shall  be  deemed  to  be  2  months after the date of manufacture or the date of sale by Rinnai, whichever is the latter. ...
  • Page 26 5�3 Except  where  inconsistent  with  the  purchaser’s  statutory  rights  and  the  rights  given  by  this  Warranty,  all  liabilities of Rinnai for any direct, special, indirect or consequential loss or damage, any damage or expense  for personal injury or any loss or destruction of property, arising directly or indirectly from the use or inability to use the Product or any of its parts and/or servicing the Product, are expressly excluded.  5�4 Geographical Climate Zones – Rinnai New Zealand Ltd does not exclude this product from installation in the  Cool climatic zone (see below reference map) but cannot guarantee appliance heating performance as per  the published literature at temperatures below zero.  Appliance sizing is critical in these installations, see 5.1. Warm...
  • Page 27 As per the Terms and Conditions of Warranty, purchasers are responsible for the costs of any repair and/or call out fee where, on inspection, the alleged defect is found by Rinnai’s Authorised Service Agent not to be covered  by this warranty or any statutory consumer guarantee applicable to the Product. The Terms and Conditions of Warranty contain important information about your rights and obligations under this warranty. Please read them fully and carefully before making a claim. Contact Rinnai New Zealand at: 0800 RINNAI (746 624) | info@rinnai.co.nz Rinnai Split AC OM...
  • Page 28: Contacts

    Tel: 1300 555 545* Fax: 1300 555 655 Monday to Friday, 8.00 am to 5.00 pm EST. *Cost of a local call higher from mobile or public phones. For further information visit www.rinnai.com.au or email enquiry@rinnai.com.au innai New Zealand Ltd...

Table of Contents