Warnings And Important Information; Regulatory / Installation / Safety - Rinnai brivis Contour Series Installation Manual

WARNINGS AND IMPORTANT INFORMATION

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Failure to carefully read and follow all instructions in this manual can result in equipment malfunction,
IMPORTANT
property damage, personal injury and/or death�
WARNINGS:
CAUTIONS:
SHALL/MUST/
IMPORTANT:
SHOULD:
DISCLAIMER:

REGULATORY / INSTALLATION / SAFETY

This appliance SHALL BE installed in accordance with:
WARNING
Manufacturer's Installation Instructions.
Current AS/NZS 3000 (electrical codes).
Local Regulations and Municipal Building Codes including local OH&S requirements.
Local water authority regulations
Duct fixing regulations, EPA guidelines and AS HB276-2004 "A Guide to Good Practice"
ALWAYS comply with the following precautions to avoid dangerous situations and to ensure
optimum performance.
This appliance MUST BE installed, maintained and removed by an Authorised Person.
This appliance is heavy, use 2 people or mechanical lifting device. Improper lifting may result in
serious injury.
Take care when opening or unpacking this appliance. Failure to do so may result in serious injury
or product failure.
DO NOT modify the electrical wiring of this appliance. If the control power wiring is damaged or
deteriorated then it MUST BE replaced by an authorised person. Failure to do so may result in
electric shock, fire, serious injury or product failure.
This appliance is intended to be permanently connected to the water mains and NOT to be
connected by a hose-set.
If the supply cord is damaged, it MUST BE replaced by manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Brivis Contour, Brivis Promina and Brivis Advance evaporative coolers are NOT intended for
installation in BAL-12.5 to BAL-29 areas.
Brivis AD BAL evaporative coolers may be installed in BAL-12.5 to BAL-29 areas.
Brivis
WHEN IGNORED, CAN RESULT IN SERIOUS INJURY OR DEATH.
WHEN IGNORED, CAN RESULT IN MINOR INJURY OR PRODUCT DAMAGE.
INDICATES A MANDATORY REQUIREMENT OF THIS MANUAL.
INDICATES A RECOMMENDED REQUIREMENT OF THIS MANUAL.
Any deviations from these instructions may, at the discretion of Rinnai, void
the warranty. As a result, the customer and/or installer may be charged a fee for
product non-warranty related call outs. Also, note that failure to comply with
these instructions may preclude Rinnai from being able to service the unit.
This document is a guide only. Laws, regulations and industry standards can
vary between States and Territories.
Accordingly, this guide MUST BE read in conjunction with, and subject to, all
laws, regulations and industry standards applicable in the State or Territory in
which the products are installed.
You MUST ensure that the installation of the products will comply with those
laws, regulations and standards, and that the products recommended to
customers are fit for the purpose for which they are intended.
5 Evap AC IM