General Information; Technical Specifications - Timeguard MLTP180BK Installation & Operating Instructions Manual

1. General Information

These instructions should be read carefully and retained for further reference
and maintenance.
2. Safety
• Before installation or maintenance, ensure the mains supply to the PIR
sensor is switched off and the circuit supply fuses are removed or the
circuit breaker turned off.
• It is recommended that a qualified electrician is consulted or used for the
installation of this PIR sensor and install in accordance with the current
IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this PIR sensor
is fitted does not exceed the rating of the circuit cable, fuse or circuit breaker.

3. Technical Specifications

• 230V AC 50 Hz
• This PIR sensor is of Class II Construction and must not be earthed
1
• Detection Range:
• Detection Angle:
• Maximum Switching Load:
• Time ON Adjustment:
• Warm Up Time:
• Lux Adjustment:
• Operating Temperature:
• Manual Override:
• Back Box Mounting Centres: 60mm
• IP55 Rated suitable for restricted external applications
• CE Compliant
• Dimensions (H x W x D):
Up to 12m at a 2.5m mounting height
180°
2300W Halogen Lighting
500W Fluorescent and LED Lighting
2 seconds to 30 minutes
30 seconds
2 to 1000 lux
-25°C to +45°C
Double pulse within 2 seconds,
to enter 6 hours ON time (night time only).
81.8 x 81.8 x 67.1mm