General Information; Safety; Technical Specifications - Timeguard TRT032N Operating Instructions Manual

1. General Information

These instructions should be read carefully and retained for further reference
and maintenance.

2. Safety

• Before installation or maintenance, ensure the mains supply to the
thermostat is switched off and the circuit supply fuses are removed or the
circuit breaker turned off.
• It is recommended that a qualified electrician is consulted or used for the
installation of this thermostat and install in accordance with the current
IEE wiring and Building Regulations.
• Check that the total load on the circuit including when this thermostat is
fitted does not exceed the rating of the circuit cable, fuse or circuit breaker.
• To clean use a clean dry cloth only. Do not use any liquid cleaners.

3. Technical Specifications

1
• 230V AC 50 Hz
• This time switch is of Class ll Construction and must not be earthed
• Switch Rating:
• Switch Type:
• Connection Type:
• Installation Type:
• Micro Disconnection:
• Operating Temperature Range: 0°C to +40°C
• Set Temperature Range:
• Temperature Swing Adjuster: +/- 0.5°C or 1.0°C set by DIP switch
• PID Adjustment:
6(2)A
Single pole, single throw (SPST)
3 wire
Surface mount with wall plate
Type 1.B control action
Minimum +5°C to maximum +30°C
ON or OFF set by DIP switch