Unpacking; Installation; Breaking In; Setting Up The Remote Control - Canton Digital Movie 9 Operating Instructions Manual

English

Unpacking

unpack the box carefully and check that all the following
parts are present:
• 1x Canton Soundbar DM 9
• 1x Remote control inc. battery
• 1x Mains cable
• 1x optical digital audio cable
• 1x stereo RCA-cable
• 1x digital RCA-cable

Installation

in case of wall-mouting the Digital Movie should be positioned
below the flat-screen tV. in connection with a free-standing flat-
screen tV it should be positioned in front of the flat-screen tV.
28

Breaking in

Maximum sound quality requires a breaking-in
time of 15 – 20 operating hours.
• During this time operate the loudspeaker at
normal volume
• Avoid high noise levels
• Listen to a variety of music
Setting up the
remote control
the remote control comes with a battery already installed.
Simply remove the protective film to activate. When replacing
the battery ensure that it is correctly inserted according to
the polarity markings (+/–). Only use the battery specified
for this system (CR 2032).
Note
the battery provided is intended for test use and may there-
fore have a shorter lifespan.

Connection Terminal

SUB OUT
Service
DM 9
DM Soundbar
open closed
CR 2032
Remote control
Connections DM
Power inlet
1
Output – ext. Subwoofer
2
input – tV (optical)
3
input – DVD (coaxial)
4
input – AuX (analogue)
5
Jack service (Canton)
6
English
29