Table of Contents
Advertisement
...6 MAINTENANCE
...Continued
Low Linear Val.
20.00 mg/l
Calculating Coef.
Low Linear Coef.
1.29
High Linear Val.
80.00 mg/l
Calculating Coef.
High Linear Coef.
1.38
Alter Fac. Code
0000
26
This setting does not need to be adjusted.
This setting does not need to be adjusted.
This setting does not need to be adjusted.
This setting does not need to be adjusted.
This setting does not need to be adjusted.
This setting does not need to be adjusted.
After 'Factory Setting' security code enter value in the range 0000 to 9999.
Note.
To reset factory default settings:
1)
Switch off the instrument.
2)
Swtich on again with the down arrow switch pressed.
Advertisement
Table of Contents
