Important Safety Instructions - Microlife NEB400 Manual

1. Explanation of Symbols
Electronic devices must be disposed of in accordance with
the locally applicable regulations, not with domestic waste.
Read the instructions carefully before using this device.
Type BF applied part
Class II equipment
SN N Serial number
Reference number
Manufacturer
Distributor
ON
OFF
Protection against solid foreign objects
IP21
and harmful effects due to the ingress of
water
0123
CE Marking of Conformity

2. Important Safety Instructions

 Follow instructions for use. This document provides important
product operation and safety information regarding this device.
Please read this document thoroughly before using the device
and keep for future reference.
 This device may only be used for the purposes described in
these instructions. The manufacturer cannot be held liable for
damage caused by incorrect application.
 Retain instructions in a safe place for future reference.
 Do not operate the unit in presence of any anesthetic mixture
inflammable with oxygen or nitrogen protoxide.
 This device is not suitable for anaesthesia and lung ventilation.
 This device should only be used with original accessories as
shown in these instructions.
2
 Do not use this device if you think it is damaged or notice
anything unusual.
 Never open this device.
 This device comprises sensitive components and must be
treated with caution. Observe the storage and operating condi-
tions described in the «Technical Specifications» section.
 Protect it from:
- water and moisture
- extreme temperatures
- impact and dropping
- contamination and dust
- direct sunlight
- heat and cold
 Comply with the safety regulations concerning the electrical
devices and in particular:
- Never touch the device with wet or moist hands.
- Place the device on a stable and horizontal surface during its
operation.
- Do not pull the power cord or the device itself to unplug it
from the power socket.
- The power plug is a separate element from the grid power;
keep the plug accessible when the device is in use.
 Before plugging in the device, make sure that the electrical
rating, shown on the rating plate on the bottom of the unit, corre-
sponds to the mains rating.
 In case the power plug provided with the device does not fit your
wall socket, contact qualified personnel for a replacement plug
with that of a suitable one. In general, the use of adapters,
simple or multiple, and/or extension cables is not recom-
mended. If their use is indispensable, it is necessary to use
types complying with safety regulations, paying attention that
they do not exceed the maximum power limits, indicated on
adapters and extension cables.
 Do not leave the unit plugged in when not in use; unplug the
device from the wall socket when it is not in operation.
 The installation must be carried out according to the instructions
of the manufacturer. An improper installation can cause
damage to persons, animals or objects, for which the manufac-
turer cannot be held responsible.
 Do not replace the power lead of this device. In case of a power
lead damage, contact a technical service center authorized by
the manufacturer for its replacement.