Important Safety Instructions - Microlife NEB 210 Manual

ON
OFF
Protection against solid foreign objects
IP21
and harmful effects due to the ingress of
water
Authorized representative
EC REP
in the European Community
Medical device
Distributor
Caution
Single patient
multiple use (for accessories only)
Humidity limitation
Temperature limitation
Ambient pressure limitation
1639
CE Marking of Conformity

2. Important Safety Instructions

 Follow instructions for use. This document provides important
product operation and safety information regarding this device.
Please read this document thoroughly before using the device
and keep for future reference.
 This device may only be used for the purposes described in
these instructions. The manufacturer cannot be held liable for
damage caused by incorrect application.
 Retain instructions in a safe place for future reference.
 Do not operate the unit in presence of any anesthetic mixture
inflammable with oxygen or nitrogen protoxide.
 This device is designed to nebulise solution and suspension
liquids.
2
 This nebulizing system is not suitable for use in anaesthetic
breathing system or a ventilator breathing system.
 This device is not suitable for anaesthesia and lung ventilation.
 This device should only be used with original accessories as
shown in these instructions.
 Do not use this device if you think it is damaged or notice
anything unusual.
 Never open this device.
 This device comprises sensitive components and must be
treated with caution. Observe the storage and operating condi-
tions described in the «Technical Specifications» section.
 Protect it from:
- water and moisture
- extreme temperatures
- impact and dropping
- contamination and dust
- direct sunlight
- heat and cold
 Comply with the safety regulations concerning the electrical
devices and in particular:
- Never touch the device with wet or moist hands.
- Place the device on a stable and horizontal surface during its
operation.
- Do not pull the power cord or the device itself to unplug it
from the power socket.
- The power plug is a separate element from the grid power;
keep the plug accessible when the device is in use.
 Before plugging in the device, make sure that the electrical
rating, shown on the rating plate on the bottom of the unit, corre-
sponds to the mains rating.
 In case the power plug provided with the device does not fit your
wall socket, contact qualified personnel for a replacement plug
with that of a suitable one. In general, the use of adapters,
simple or multiple, and/or extension cables is not recom-
mended. If their use is indispensable, it is necessary to use
types complying with safety regulations, paying attention that
they do not exceed the maximum power limits, indicated on
adapters and extension cables.
 Do not leave the unit plugged in when not in use; unplug the
device from the wall socket when it is not in operation.
 The installation must be carried out according to the instructions
of the manufacturer. An improper installation can cause