Table of Contents
Advertisement
Available languages
Available languages
Dear Customer,
This Microlife fingertip pulse oximeter is a portable non-
invasive device intended for spot-checking of the oxygen
saturation of arterial hemoglobin (SpO
adults and pediatric patients. It is suitable for private use (at
home, or on the go) as well as for use in the medical sector
(hospitals, hospital-type facilities). It has been clinically
proven to be of high precision during repeatability.
If you have any questions, problems or want to order spare
parts please contact your local Microlife-Customer Service.
Your dealer or pharmacy will be able to give you the
address of the Microlife dealer in your country. Alterna-
tively, visit the internet at www.microlife.com where you will
find a wealth of invaluable information on our products.
Retain instructions in a safe place for future reference.
Stay healthy - Microlife Corporation!
Table of contents
1.
2.
3.
4.
5.
6.
7.
8.
2
9.
) and pulse rate of
2
1. Important Safety Instructions
Follow instructions for use. This document provides
important product operation and safety information
regarding this device. Please read this document thor-
oughly before using the device and keep for future
reference.
This device may only be used for the purposes
described in these instructions. The manufacturer
cannot be held liable for damage caused by incorrect
application.
Never immerse this device in water or other liquids.
For cleaning please follow the instructions in the
« Cleaning and disinfecting» section.
Do not use this device if you think it is damaged or
notice anything unusual.
Never open this device.
This device comprises sensitive components and must
be treated with caution. Observe the storage and oper-
ating conditions described in the «Technical Specifica-
tions» section.
Protect it from:
water and moisture
extreme temperatures
impact and dropping
contamination and dust
direct sunlight
heat and cold
The function of this device may be compromised when
used close to strong electromagnetic fields such as
mobile phones or radio installations and we recom-
mend a distance of at least 1 m (according to 60601-1-
2 table 5). In cases where you suspect this to be
unavoidable, please verify if the device is working prop-
erly before use.
Do not use the device in an MRI or CT environment.
This device is not intended for continuous monitoring.
This device does not have an alarm function and is
therefore not suitable for evaluating medical results. Do
not use this device in situations where alarms are
required.
Do not sterilize this device using autoclaving or
ethylene oxide sterilizing. This device is not intended
for sterilization.
If the device is not going to be used for a prolonged
period the batteries should be removed.
Advertisement
Table of Contents
