Table of Contents
Advertisement
About this Manual
This manual will cover information needed for the proper installation and operation of your Kinetico Softening
System. We have also included information regarding the frequently asked questions about softening
systems. This information may be more technical in nature, but provides further insight to the continued
operation of this equipment at its highest levels.
This manual will use various icons to help highlight issues that are relevant to the safe operation of this
equipment. The following icons will be used as described:
General information regarding the application of this product
will be highlighted by this icon. This will include technical
specifications and expected operational results.
A caution icon will be used to present any information that
may hold a potential hazard or concern during the
installation, use or maintenance of this product. Should this
information not be followed, it may result in damage to
this equipment and its surroundings.
The warning icon will be used to present any information that
may result in a severe hazard or concern during the
installation, use or maintenance of this product. Should this
information not be followed, it may result in severe
physical harm.
Any tools or materials required during the installation, use or
maintenance of this equipment will be preceded by this icon.
Using these specific tools will minimize time and effort. Not
using the proper tool may result in damage to this
equipment, its surroundings or even physical harm.
If there are any additional questions pertaining to this equipment, please contact your local Kinetico Dealer for
further assistance.
The Commercial Plus Series
The CP Series provides continuous soft water for commercial applications. The unique design of Kinetico's
control valve, allow for all softener functions to operate fully automatically, and non-electrically. The system
has a number of options as described:
(OD) – Overdrive
The Overdrive feature provides for both tanks on-line during service. During regeneration, one tank is
in service and provides water to the regenerating tank. All CP system are shipped in the Overdrive
mode. The alternating disc is also included. To apply a (s) standard flow configuration, the OD
version is purchase and modified at the time of install.
(s) – Standard
The standard softener configuration provides duplex tanks and control valve. The control valve
operates fully automatically, with all service and regeneration functions being performed based on
operating pressure. The brining system is not included with the standard package. This allows for a
variety of brine tanks to be added as an option.
(r) - Remote Start
The remote start option is similar to the standard configuration with the exception of the function of
the control valve. With the remote start, the system control is only initiated by an external hydraulic
signal. With allow control of the timing of regeneration by an external device.
December 15, 2004
Rev. 3
General Information
CP Series Technical Manual
Page - 3
Hide quick links:
Advertisement
Table of Contents
