Page 1
Stratus 2002-2004 Durango 2002-2003 KIT FEATURES: The SWC-01 is designed to retain the factory steering wheel controls that are normally lost when replacing the original factory radio with an aftermarket radio. KIT COMPONENTS: A) SWC-01 B) 10 Way Wire Harness C) Infrared LED with Harness...
Green wire: steering wheel control wire for resistive type systems (see applications) Pink wire: steering wheel control wire for Data type systems (see applications) • * Note: Do NOT plug in wiring harness into the SWC-01 until all DIP switch settings are set. Radio DIP Switch Settings If you look at the DIP switches on SWC-01 you will see that they are separated into 2 groups of 8 DIP switches each.
SWC-01 Radio DIP Switch Settings Locate the radio you are installing and set the DIP switches according to the chart below: Radio Switch 1 Switch 2 Switch 3 Switch 4 Switch 5 Switch 6 Switch 7 Switch 8 Alpine down...
SWC-01 Vehicle Applications Each application will have a connector view of the plug that is in the vehicle along with the wire color and location. The CAR DIP switch settings for the vehicles will also be listed along with any other action required to finish the wiring in the vehicle.
Page 7
SWC-01 (GM Continued From Previous Page) For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIP Switch settings as follows: Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8...
Page 8
Chevy Malibu Dk. Blue Connect A10, White/Black, to chassis ground For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIP Switch settings as fol- lows: Dip 1 Dip 2 Dip 3 Dip 4...
Page 9
Oldsmobile Bravada Orange For the vehicles listed above use the Pink wire on the SWC-01 and set the CAR DIP Switch settings as follows: Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8...
Oldsmobile Aurora Lt. Green For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIP Switch settings as follows: Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8...
Page 11
SWC-01 (GM Continued From Previous Page) For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIP Switch settings as follows: Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8...
Grand Cherokee 14 Yellow/Violet For the vehicles listed above use the Pink wire on the SWC-01 and set the CAR DIP Switch settings as follows: Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8...
Grand Cherokee Yellow/Violet For the vehicles listed above use the Pink wire on the SWC-01 and set the CAR DIP Switch settings as follows: Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8...
Mercury Mountaineer yellow For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIP Switch settings as follows: Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8...
Marauder lt. blue/red For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIP Switch settings as follows: Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8...
Brown/Yellow, to chassis ground For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIP Switch settings as follows: Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8...
Connect pin 2 on C3,Purple, to chassis ground For the vehicles listed above use the Green wire on the SWC-01 and set the CAR DIP Switch settings as follows: Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Dip 7 Dip 8...
SWC-01 Mounting The Infrared L.E.D. The infrared L.E.D. (I.R.E.D.) can be flushed mounted in a variety of locations within the cabin of the vehicle, the higher the location the better to prevent anything blocking the I.R.E.D. . The I.R.E.D. is high intensity so it does not need to be pointed directly at the radio, however the more towards the radio it points the better it will work.
3)Take the I.R.E.D. and place the snap in mount over it. Feed the cable through the mounting hole and snap the I.R.E.D. into the hole. 4)Run the I.R.E.D. cable up to the SWC-01 and connect it. Tie up any loose wiring to prevent it from getting it caught on any moving parts.
Need help?
Do you have a question about the SWC-01 and is the answer not in the manual?
Questions and answers