Metra Electronics 95-8202 Installation Instructions Manual

Metra Electronics 95-8202 Installation Instructions Manual

Toyota/scion multi-kit 2000-up

Advertisement

INSTALLATION INSTRUCTIONS FOR PART 95-8202
Toyota/Scion multi-kit 2000-up
KIT FEATURES
• Double DIN radio provision
• Stacked ISO DIN radio provision
KIT COMPONENTS
• A) Double DIN trim plate
A
METRA. The World's best kits.
APPLICATIONS
See application list inside
95-8202
1-800-221-0932
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness:
• 70-1761 Toyota harness 1987-up
• 70-8113 Toyota harness 1987-up
• TYT0-01 Toyota amp harness 2003-up
Antenna Adapter:
• Not required
TOOLS REQUIRED
• Cutting tool • Phillips screwdriver • Socket set
• Grinder
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 95-8202 and is the answer not in the manual?

Questions and answers

Summary of Contents for Metra Electronics 95-8202

  • Page 1 INSTALLATION INSTRUCTIONS FOR PART 95-8202 APPLICATIONS See application list inside WIRING & ANTENNA CONNECTIONS (sold separately) Toyota/Scion multi-kit 2000-up Wiring Harness: 95-8202 • 70-1761 Toyota harness 1987-up • 70-8113 Toyota harness 1987-up KIT FEATURES • TYT0-01 Toyota amp harness 2003-up • Double DIN radio provision Antenna Adapter: • Stacked ISO DIN radio provision • Not required TOOLS REQUIRED • Cutting tool • Phillips screwdriver • Socket set • Grinder KIT COMPONENTS • A) Double DIN trim plate CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation.
  • Page 2: Table Of Contents

    95-8202 Applications Table of Contents Dash Disassembly Toyota – Scion XA 2004-2006 ..........12 Rav4 ............2001-2005 – Scion XB 2004-2007 ..........12 – Toyota Rav4 2001-2005 ..........3 MR2 Spyder ..........2000-2003 Celica 2000-2005 – Scion XB 2008-up ............. 13 – Toyota MR2 Spyder 2000-2003 ........3 Echo ............2000-2005...
  • Page 3: Dash Disassembly

    Dash Disassembly 95-8202 Toyota Rav4 2001-2005 Toyota MR2 Spyder 2000-2003 1. Unclip and remove side panel from 1. Unsnap the lower trim piece from both sides of radio and climate each side of the dash console and controls. (Figure A) remove (2) Phillips screws exposed in each cavity. Remove the upper 2. Remove (4) Phillips screws trim piece from each side of the securing the radio/climate control console. (Figure A) trim panel. (Figure B) 3. Remove (4) 10 mm bolts securing 2. Remove the climate control knobs the radio. (Figure C) and (2) Phillips screws exposed. Remove the climate control trim 4. Unplug and remove radio. bezel. (Figure A) 5. Remove factory brackets from 3. Remove the ashtray and (1) 10mm radio. Retain brackets for use (Figure B) bolt exposed. Unclip the ashtray...
  • Page 4: Toyota Celica 2000-2005

    Dash Disassembly 95-8202 Toyota Celica 2000-2005 Toyota Echo 2000-2005 1. Unclip and remove the gear shifter 4. Remove (4) 10mm screws securing 1. Remove the climate control knobs 2. Remove the ashtray. Unclip and trim bezel and remove (2) Phillips the factory radio and disconnect remove the radio trim bezel. Remove and (2) Phillips screws exposed. screws exposed below the climate the wiring. (2) Phillips screws from the bottom Unclip and remove the climate controls. (Figure A) of the radio brackets and disconnect control trim bezel. Depress the side 5. Remove factory brackets the wiring. clips securing the climate control 2. Pull off climate control knobs and from radio. Retain brackets for use panel and move the panel to access remove (2) Phillips screws exposed. during kit assembly. 3. Remove factory brackets from radio.
  • Page 5: Toyota Highlander 2001-2007

    Dash Disassembly 95-8202 Toyota Highlander 2001-2007 Toyota Matrix 2005-2008 1. Pull and remove dash panel from 1. Unclip the bottom edge of the radio radio and climate controls. Tip: trim panel then lift up and out to There are 8 clips. (Figure A) remove. (Figure A) 2. Remove (6) 10mm bolts from radio 2. Remove (4) 10mm bolts securing and climate controls assembly. the factory radio. (Figure B) (Figure B) Continue to kit assembly 3. Remove assembly and disconnect (Figure A) the wiring. 4. Remove (8) Phillips bolts and (4) Phillips screws to separate brackets from assembly. Retain (Figure A) brackets for use during kit assembly. (Figure C)
  • Page 6: Toyota Matrix 2009-2010

    Dash Disassembly 95-8202 Toyota Matrix 2009-2010 Toyota 4 Runner 2003-2009 (with factory navigation) (excluding Limited) 1. Unclip and remove the radio trim 1. Unsnap and remove trim from panel including the A/C vent. around shifter. (Figure A) 2. Unsnap and remove trim covers PASSENGER 2. Remove (4) 10mm bolts securing from around center console pocket SECURITY the factory radio. Unplug and edge at front and rear of console. remove the radio. (Figure B) 3. Unsnap and remove center console Continue to kit assembly cover. (Figure A) 4. Unsnap trim ring from around (Figure A) ignition key cylinder.
  • Page 7: Toyota Tundra 2003-2006

    Dash Disassembly 95-8202 Toyota 4 Runner 2003-2009 Toyota Tundra 2003-2006 (excluding Limited) 7. Remove (1) 10mm bolt beneath 1. Remove the (3) climate control climate control behind pocket knobs by pulling straight outward. door. Unsnap and remove climate (Figure A) control. (Figure C) 2. Remove (3) Phillips screws from 8. Remove (2) 10mm bolts beneath behind knobs. (Figure A)) radio behind climate controls. 3. Position vents facing upward and 9. Unsnap and remove entire center remove (1) Phillips screw from panel around radio. (Figure D) each A/C vent. (Figure B) (Figure B) (Figure A) 10. Remove (2) 10mm bolts Continued on next page securing radio.
  • Page 8: Toyota Sequoia 2003-2007

    Dash Disassembly 95-8202 Toyota Tundra 2003-2006 Toyota Sequoia 2003-2007 4. Unclip and remove entire trim 1. Position vents facing upward and remove (1) Phillips screw from panel. (Figure C) each A/C vent. (Figure A) 5. Remove (4) 10mm bolts to remove 2. Unclip and remove entire radio trim radio. (Figure D) panel including climate controls. (Figure B) 6. Unplug and remove radio. 3. Remove (4) 10mm bolts to remove 7. Remove factory brackets from radio. (Figure C) radio. Retain brackets for use during kit assembly. 4. Unplug and remove radio. (Figure C) Continue to kit assembly 5. Remove factory brackets from...
  • Page 9: Toyota Fj Cruiser 2007-Up

    Dash Disassembly 95-8202 Toyota FJ Cruiser 2007-up 1. Remove two Phillips screws from bottom part of side trim panels. (Figure A) 2. Using a panel removal tool, carefully remove the side trim panels. (Figure B) 3. Remove (2) Phillips screws from radio trim panel. (Figure C) (Figure A) (Figure B) 4. Using panel removal tool, carefully remove radio trim panel. (Figure D) 5. Remove (4) 10mm bolts securing the radio. 6. Unplug and remove radio. 7. Remove factory brackets from radio. Retain brackets for use during kit assembly. (Figure C) (Figure D) Continue to kit assembly...
  • Page 10: Toyota Yaris 2007-Up

    Dash Disassembly 95-8202 Yaris 2007-up Yaris 2012-2013 1. Unclip the bottom trim panel 1. Unclip and remove entire panel including A/C vent on passenger side of dash. (Figure A) located underneath the A/C controls. (Figure A) 2. Unclip and remove the panel from around the radio. (Figure B) 2. Unclip the two side trim panels that surround the A/C controls and 3. Remove four 10 mm bolts and remove radio. (Figure A) factory radio. (Figure C) 3. Unclip the Instrument trim Panel Continue to kit assembly surrounding the speedometer and gauges. (Figure B) 4. Unclip the radio/AC vents trim panel. (Figure B) 5. Remove (4) Phillips screws securing radio. (Figure C) (Figure C) (Figure A) 6. Unplug and remove radio.
  • Page 11: Scion Fr-S 2013

    Dash Disassembly 95-8202 Scion FR-S 2013 Scion IQ 2012-2013 1. Unclip and remove the panel from 1. Unclip and remove the climate control panel. (Figure A) around the radio. (Figure A) 2. Unclip and remove the panel from 2. Remove four 10 mm bolts and around the radio. (Figure B) remove factory radio. (Figure B) 3. Remove four 10 mm bolts and Continue to kit assembly remove factory radio. (Figure C) Continue to kit assembly (Figure B) (Figure A) (Figure B) (Figure A)
  • Page 12: Scion Xa 2004-2006

    Dash Disassembly 95-8202 Scion XA 2004-2006 Scion XB 2004-2007 1. Pull outward on the (3) 1. Pull outward on the (3) climate control knobs and climate control knobs and remove. (Figure A) remove. (Figure A) 2. Remove (2) Phillips screws from behind the outer (2) 2. Remove (2) Phillips screws knobs. (Figure B) from behind the outer two 3. Unsnap and remove the entire panel surrounding the climate knobs. (Figure B) climate controls and the radio. (Figure C) 3. Unsnap and remove the 4. Remove (4) Phillips screws to remove the trim pieces on each side of factory radio. the climate control/ashtray/ pocket assembly. (Figure C) 5. Remove factory brackets from radio. Retain brackets for use during kit assembly. 4. Remove (2) Phillips screws from the bottom of the...
  • Page 13: Scion Xb 2008-Up

    Dash Disassembly 95-8202 Scion XB 2008-up Scion TC 2005-2010 1. Unclip and remove the trim panel 1. Unsnap trim from around shifter around the radio including the A/C (not necessary to be removed). vents. (Figure A) (Figure A) 2. Unclip and remove the trim panel 2. Unclip and remove panel from at the bottom edge of the dash around radio (including climate cavity. (Figure B) controls and radio door). (Figure B) 3. Remove (4) 10mm bolts securing 3. Remove (2) 10mm nuts from the radio. (Figure C) the top mounting locations and (2) 10mm bolts from the bottom Continue to kit assembly mounting locations to remove the (Figure B) radio. (Figure C) (Figure B) 4. Remove factory brackets from...
  • Page 14: Scion Tc 2011-Up

    Dash Disassembly 95-8202 Scion TC 2011-up Scion XD 2008-up 1. Unclip and remove the radio trim 1. Unclip radio trim panel. Unplug and remove panel. (Figure A) panel. (Figure A) 2. Remove (4) Phillips screws securing the radio. Unplug and remove radio. 2. Remove (4) 10mm bolts securing (Figure B) the radio. (Figure B) 3. Remove factory brackets from radio. Retain brackets for use during kit 3. Remove factory brackets from assembly. (Figure C) radio. Retain brackets for use Continue to kit assembly during kit assembly. Continue to kit assembly (Figure A) (Figure A) (Figure B)
  • Page 15: Subaru Brz 2013

    Dash Disassembly 95-8202 Subaru BRZ 2013 Subaru Forester (with SD based navigation) 2009-2013 1. Unclip and remove the panel from around the radio. (Figure A) 1. Unclip and remove the trim panel surrounding the factory radio 2. Remove four 10 mm bolts and including the A/C vents. (Figure A) remove factory radio. (Figure B) 2. Remove (4) Phillips screws Continue to kit assembly securing the radio. Unplug and remove the radio. (Figure B) Continue to kit assembly (Figure A) (Figure A) TEXT...
  • Page 16: Kit Preparation

    Kit Assembly 95-8202 Kit Preparation Double DIN radio provision NOTE: For all Scion TC and XA you 1. Locate the factory wiring harness will need to cut off the front upper in the dash. Metra recommends section of the Double DIN trim using the proper mating adapter plates, as shown by dotted lines from Metra or AXXESS. Re-connect...
  • Page 17: Stacked Iso Din Radio Provision

    Kit Assembly 95-8202 Stacked ISO DIN radio provision Notes 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Attach the factory mounting brackets and the 95-8202 double DIN trim plates to the stacked Factory ISO DIN radios with the screws brackets may differ supplied with the units. (Figure A) NOTE: Remove locating (Figure A) pins from factory brackets with grinder. 4. Reassemble dash in reverse order of disassembly.
  • Page 18 Notes...
  • Page 19 Notes...
  • Page 20 INSTALLATION INSTRUCTIONS FOR PART 95-8202 NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

Table of Contents