The Capsule Piercing Tool - Dualit 3 in 1 Coffee Machine Instruction Manual & Guarantee

PRIMING -
BEFORE EACH USE
The Brewhead, Filter Holder and cup must be the correct operating
temperature before the first use. Thereafter, subsequent cups must be
pre-warmed before EACH coffee.
1 REGISTER MY 2
APPLIANCE
Register your appliance at Fill the Water Tank with
www.dualit.com. This will water; do not go above the
only take 60 seconds. You 'MAX' mark. You will see air
will need the product model bubbles at the connection
and serial numbers that are when correctly located.
on the rating label on the
base of the product.
5
4
WAIT 40 SECONDS
The temperature neon will Align the Holder with
go out once the Thermobloc the open lock symbol,
is at the correct operating insert then rotate 60° past
temperature. the closed lock symbol.
Ensure the Holder
is fully locked before
dispensing.
FILL WATER TANK 3 TURN
ON
Plug in Power Cord. Press
Button to turn 'ON'. The
Thermobloc Water Heater
system is now heating to the
correct temperature.
6
ATTACH HOLDER PRE-HEAT FILTER
HOLDER
LOCK
Dispense a cup full of water
(min 240ml) through the
machine. Ensure NO coffee
is in the Cup Filter Holder.
10
7 8
WARM CUP
If you like your coffee extra Your machine is ready to go.
hot, the serving cup or mug
must be warmed through
before EACH coffee or tea.
Dispense a cup full of water,
then discard the water.

THE CAPSULE PIERCING TOOL

1
Choose your capsule (if your capsule does not require piercing, skip to page 12).
CAUTION! Capsule Piercing Tool has sharp blades, use with care.
CAPSULE TYPES
PIERCER REQUIRED TO ACTIVATE CAPSULE & INDUCE EXTRACTION
Nespresso ® * Capsules Dualit Compostable
* Suitable for Nespresso ® drop through machines, excluding professional machines and 'built-in' models.
Nespresso ® trademark is owned by Socété des Produits Nestlé S.A.
+ Suitable for industrial composting through authorised food waste collection schemes.
Yes required
READY
+ Dualit Aluminium
Capsules Capsules
Not required
11