Descale Regularly - Dualit 3 in 1 Coffee Machine Instruction Manual & Guarantee

7
CLEAN THE 8 FLUSH THE
STEAM WAND STEAM WAND
IMPORTANT NOTICE:
Use the Steam Pin to
Turn on your machine.
remove dried milk from
Flush the Steam Wand
inside the Steam Wand.
by dispensing water or
Use the Measuring Spoon
steam to remove any
to place the Nut back on
milk residue from inside
the Steam Wand. Screw
the Steam Wand. Risk of
clockwise until tight. scalding.
MAINTENANCE
10 FILTER PAPER
Kilrock Espresso & Coffee Machine Descaler
A build-up of limescale can cause your coffee machine
to stop working. Dualit recommends descaling at least
once a month and more regularly in hard water areas,
to prevent limescale build up in your coffee machine.
The descale cycle will take approximately 45 minutes to
complete. Each box includes two descale treatments.
OSCAR Water Softening Bags
A build-up of limescale is one of the most common
causes of coffee machine break downs. OSCAR Water
Softening Bags (OSCAR Bags) are placed in your coffee
Remember to use Filter Papers.
machine's water tank and work to soften the water,
These can help to prevent
reducing limescale build-up. The OSCAR Bags are
Filter blockages. These are
suitable for all Dualit Pump Espresso Coffee Machines
available directly from
with Water Tanks.
www.dualit.com/filterpapers.
For more information, visit our website
www.dualit.com/machine-care.
9 REPLACEMENT
STEAM WAND
If the Steam Wand is
completely blocked, it is
possible to remove the Wand
assembly for cleaning. Visit our
service section on
www.dualit.com/support for
replacement advice or to
purchase spare parts.
22

DESCALE REGULARLY

HARD WATER WILL CAUSE LIMESCALE BUILD-UP,
RESULTING IN BLOCKAGES THAT CAUSE PERMANENT
DAMAGE. IMPORTANT NOTICE: PRODUCT FAILURE
DUE TO THE BUILD UP OF LIMESCALE IS NOT COVERED BY GUARANTEE.
Dualit recommends descaling regularly, in a well-ventilated area to prevent limescale build up
in the machine. See limescale warning on page 6-7 for frequency in your area in accordance
with the hardness of your water. It is essential that a compatible descaler is used - visit
www.dualit.com for descaler options. The descale process takes approximately 30 minutes.
CAUTION: AVOID CONTACT WITH DESCALING SOLUTION.
STEAM RELEASED DURING DESCALE PROCESS MAY BE HARMFUL.
RISK OF SCALDING AND INJURY.
1 2
THE DESCALER FILTER HOLDER &
NX
Ensure your descaling Place the Holder most
product is suitable for frequently used into the
coffee machines; follow machine, ensuring it is
descaling product
empty. If both Holders and
instructions carefully. Filters are used frequently,
If you are using a water cycle between them. Do
softener, ensure water not soak the holders in
softener is removed before descale solution. Ensure
adding descaler. Fill Water they are rinsed thoroughly
Tank with the descaling after descaling.
solution.
3
CONTAINER
HOLDER
®
OR
Place a container with
a capacity of more than
1 litre on the Drip Tray
underneath the Holder.
Caution: Do not
remove the Drip Tray.
Remove Froth Nozzle from
the Steam Wand. Direct
Steam Wand into container.
23