Dualit Espress-Auto - Coffee and Tea Machine Manual

YOUR COFFEE & TEA MACHINE

High pressure espresso machines, such as your new Dualit Espress-auto Coffee & Tea Machine, require constant care and maintenance to prolong their life. Please remember to:

• Rinse through and wipe the Steam Wand after every use.
• Descale your machine on a regular basis.
• Rinse between coffee and tea extraction.
• Unplug when not in use.

PERFECT PARTNER (SOLD SEPARATELY)

BARISTA SET

www.dualit.com/barista-set

DUALIT CUPS

More sizes available at www.dualit.com/coffeecups

DUALIT'S COFFEE CAPSULE RANGE

www.dualit.com/capsules

ECOPRESS

www.dualit.com/ecopress

Unpack the box with care, keeping all the packaging materials until you are satisfied everything is present and in working order. Once satisfied remove any tags from the appliance body and recycle the packaging appropriately. Do not remove tags from the cord. You may wish to keep the box to store your appliance.

All illustrations are for representation only, your model may have a different appearance from illustrations shown.

BEFORE FIRST USE

• Read this instruction manual before you start using the coffee machine. It gives you important safety information and will ensure you get the most out of your Dualit product.
• Keep this manual and your proof of purchase in a safe place.
• Don't forget to register your product at www.dualit.com/register.
• The Water Tank, Steam Wand, Measuring Spoon, Filter Holder and Frother Nozzle must be washed with warm soapy water, then rinsed and dried.
• THE COFFEE & TEA MACHINE MUST BE FLUSHED THROUGH WITH WATER BEFORE THE FIRST USE. Follow the instructions for set-up as if priming the appliance. Leave the Filter Holder or NX ® Adaptor empty, i.e. no ESE pod, no capsule and no ground coffee.
• Empty the whole Water Tank through the Steam Wand and Coffee Filter; this will rinse the internals ready for brewing coffee.

HOW TO MANAGE LIMESCALE BUILD-UP

LIMESCALE WARNING!
HARD WATER WILL CAUSE LIMESCALE BUILD-UP, RESULTING IN BLOCKAGES THAT WILL CAUSE PERMANENT DAMAGE OR WILL DECREASE THE LIFE OF YOUR MACHINE. TO PREVENT THIS, DESCALE REGULARLY AND USE A WATER SOFTENER.

PRODUCT FAILURE DUE TO THE BUILD UP OF LIMESCALE IS NOT COVERED BY GUARANTEE.

Before Use – Know Your Water Hardness:

• Confirm the hardness of your water with your local water company or use the quick reference map as a guide.
• Find your water company on the OFWAT site (ofwat.gov.uk/contactcompanies) and check the water hardness of your area.
• If you are unable to establish the water hardness of your area, or require further support, contact Dualit Customer Services by emailing info@dualit.com.

BRITISH ISLES WATER HARDNESS MAP

WATER HARDNESS		ACTION FREQUENCY
Hardness level	CaCO mg/l 3	Descale	Water Softener	Slow Coffee Extraction or Drop in Steam Output
Soft	0-100	At Least Once Every 2 Months or Every 100 Cycles	Replace Annually	Descale Immediately
Medium	101-200	At Least Once Per Month or Every 50 Cycles	Replace Bi-Annually	Descale Immediately
Hard*	201+	At Least Once per Month or Every 25 Cycles	Replace Bi-Annually	Descale Immediately

*Treat bottled water as hard water.

During Use - Water Softeners
You must use a Water Softener Bag (available at www.dualit.com) in medium and hard water areas, but Dualit recommends the use of a water softener in all areas. Follow the manufacturer's instructions for use. Replace the Water Softener Bag according to the table above.

During Use - Descaler
Dualit recommends using limescale removing solution (available at www.dualit.com). Follow the manufacturer's dosage and safety/handling precautions. Descale your appliance regularly according to the table above. For further assistance, contact Dualit's Customer Services by emailing info@dualit.com.

• See descale instructions for full descale procedure and further details.
• User must descale using a specific limescale removing solution, coffee machine cleaners will not descale your machine.

KNOW YOUR ESPRESS-AUTO COFFEE & TEA MACHINE

PRIMING - BEFORE EACH USE

The Brewhead, Filter Holder and cup must be the correct operating temperature before the first use. Thereafter subsequent cups must be pre-warmed before EACH coffee.

1. Register your appliance at www.dualit.com. This will only take 60 seconds. You will need the product model and serial numbers that are on the rating label on the base of the product.
   
2. Fill the Water Tank with water; do not go above the 'MAX' mark. You will see air bubbles at the connection when correctly located.
   
3. Plug in the Power Cord. Press Button to turn 'ON'. Ensure the Steam Control Valve is in the 'O' position. The Auto Dosing Buttons will flash. The Thermobloc Water Heater system is now heating to the correct temperature.
   
4. The Auto Dosing Buttons will turn solid once the temperature is correct for extraction. If you're in a hurry you can use the Auto Start feature.
   
5. Align the Holder with the open lock symbol, insert then rotate 60° past the closed lock symbol. Ensure the Holder is fully locked before dispensing.
   
6. Dispense a cup full of water (min 240ml) through the machine by pressing the Tea Button. Ensure NO coffee or tea is in the Cup Filter Holder.
   
7. If you like your coffee or tea extra hot, the serving cup must be warmed through before EACH coffee or tea. Dispense a cup full of water, then discard the water.
   
8. Your machine is ready to go.
   

THE CAPSULE PIERCING TOOL

1. Choose your capsule (if your capsule does not require piercing, skip this step).

Capsule Piercing Tool has sharp blades, use with care.

* Suitable for Nespresso ® drop through machines, excluding professional machines and 'built-in' models. Nespresso ® trademark is owned by Socété des Produits Nestlé S.A. + Suitable for industrial composting through authorised food waste collection schemes.

Yes required

Not required

2. 
   Sharp blades, use with care.
   
3. Place Capsule on a flat surface. Place Capsule Piercer Tool over the Capsule.
   
4. Gently apply pressure. Ensure Capsule Piercer Tool meets with Capsule rim. Capsule is ready to use.
   

USING DUALIT & NESPRESSO COMPATIBLE CAPSULES

Select the NX ® Holder with the grey handle. Every capsule is a sealed masterpiece of flavour. Dualit offer exceptional recyclable aluminium and environmentally friendly Compostable Capsules. Choose your favourite, unlock the aroma and enjoy.

1. Buy in store, by phone or online to enjoy rewards with Café Club. Visit Dualit.com for stockists, contact us and loyalty program.Our range of Coffee Capsules are available in retail stores, Amazon and at www.dualit.com/capsules-order.
2. Select the NX Adaptor and NX Holder. This Holder and Adaptor is for use with Dualit and Nespresso* Capsules only.
   
3. Pierce the capsule if required then place in the NX Holder and align the Adaptor.
   

* Suitable for Nespresso ® drop through machines, excluding professional machines and 'built-in' models. Nespresso ® trademark is owned by Socété des Produits Nestlé S.A. + Suitable for industrial composting through authorised food waste collection schemes.

4. Lower the Adaptor to assemble and lock Capsule in Holder.
   
5. For a tea cup (150-180ml) we recommend using 1 Capsule (depending on your strength preference). For a mug (250ml) use 2 Capsules.
   
6. We recommend extracting 50 to a maximum of 100ml from 1 Lungo Capsule. For all other flavours extract 25-35ml to make an espresso. For larger volumes of coffee, use another Capsule.
   
7. Dispose of aluminium capsules using *EcoPress ™ to empty the capsule (a) then rinse to remove any remaining grounds (b) and place in your recycling bin (c). Dualit compostable capsules should be disposed of via your council food waste collection. Plastic capsules to be disposed of via household waste. Please check with your local council that they are able to accept compostable capsules in food waste collection.
   

*EcoPress™ available to purchase from www.dualit.com.

NOTE: For a hotter drink, warm the cup first with a shot of hot water and discard.

USING ESE COFFEE PODS

ESE pods are individually wrapped and pre-tamped ensuring the perfect espresso every time. Look for the ESE logo on compatible coffee pods. THE MAXIMUM RECOMMENDED EXTRACTION IS 35ML PER ESE POD.

1. Coffee pods are available directly from retail outlets, www.dualit.com/coffee-pods or contact Dualit Customer Services by emailing info@dualit.com.
   
2. Select the ESE Pod Filter and snap into the Filter Holder.
   
3. Place one fresh coffee pod into the ESE Filter. Each pod is individually wrapped so you only use what you need.
   
4. Make sure there is no gap between the pod and Filter edge, or water will flow round the pod and your espresso will be diluted.
   
5. Make sure all the paper is tucked inside the Filter before attaching the Filter Holder to the Brewhead.
   
6. Use the tab to remove the pod once the coffee has been made.
   

USING GROUND COFFEE

Ground coffee has a three-day shelf-life, so only grind what you need. Use a medium grind suitable for espresso machines. Too fine might block your Filter, too coarse will mean you get a weak, under-extracted espresso.

1. Freshly grind your beans using setting 3-5 on the Dualit Burr Coffee Grinder, 4-6 on the Dualit Handheld Grinder or use a pre-ground coffee suitable for espresso machines.
   
2. Select the appropriate sized Cup Filter depending on whether you are making one espresso, a double or two singles. Make sure it is dry.
   
3. 
   Some very small coffee grounds can block the Cup Filters. To prolong the life of your machine use the enclosed Filter Papers with each serving.
   
4. Using the Measuring Spoon, measure out one level spoon per serving into the Cup Filter. Use 2 level spoons if using the 2 Cup Filter.
   
5. With the other end of the Measuring Spoon, 'tamp' the coffee grounds LIGHTLY. Tamping too hard, will stop water flowing through the ground coffee.
   
6. Wipe the edge of the Cup Filter clean. If you don't, a water tight seal will not form and water or coffee will leak from the Brewhead. Please refer to the extraction steps.
   

COFFEE & TEA EXTRACTION

When switching from coffee to tea, all dosing buttons may flash due to the Thermobloc heating water to your chosen temperature. When switching from tea to coffee, the machine may purge to cool the Thermobloc. This is normal operation. PLEASE CAREFULLY SELECT REQUIRED BUTTON. FAILURE TO DO SO MAY BLOCK YOUR SHOWERHEAD, PREVENTING OR SLOWING DOWN EXTRACTION.

DO NOT USE TEA BUTTON WITH COFFEE CAPSULES, THIS MAY DAMAGE YOUR MACHINE AND INVALIDATE YOUR WARRANTY.

1. Align the Filter Holder with the open lock symbol, insert then rotate 60° past the closed lock symbol. Ensure the Holder is fully locked before dispensing. Risk of scalding. Place 1 or 2 warmed cups directly under the Nozzles of the Filter Holder
   .

2. To extract, press the espresso or double espresso Auto Dosing button. To extract tea, press the tea Auto Dosing button.
   

Never use Auto Dose Tea function with coffee capsules.

3. If the machine stops mid extraction, discard and replace the capsule, ESE pod or ground coffee and restart by pressing the required Dosing Button.
   
4. When the correct dose has dispensed, the machine will automatically stop. Allow to cool for 10 seconds before removing NX Holder. All Auto Dosing buttons will illuminate when ready for the next extraction. Unplug when not in use.
   
5. Stop extraction mid cycle by pressing illuminated Dose Button, when pressed again full dose cycle will resume.
   
6. Dispense a cup full of water through the machine between making a coffee and tea to prevent tainting.
   

WHEN SWITCHING FROM STEAM TO COFFEE OR TEA EXTRACTION: WAIT 10 SECONDS BEFORE REMOVING THE HOLDER AFTER DOSING FIRST DRINK IS COMPLETE.

7. When using the Filter Holder, knock out the grounds over a bin. Rinse the Filter under running water to remove any coffee grounds. Use the Filter Pin to unblock the filters or NX ® Adaptor if required.
   
8. Turn machine off by pressing Power ON/OFF Switch after you have rinsed through and finished using the machine. This will save energy. Unplug when not in use.
   

FROTHING MILK

AFTER EACH USE, WIPE THE STEAM WAND & FLUSH THE INSIDE OF THE WAND BY DISPENSING WATER THROUGH THE WAND.

Take care when using the Milk Jug, as edges may be sharp.

1. Press the Steam Button. It will flash red until the temperature is correct for steam, then it will turn solid red.
   
2. Put the Froth Nozzle on the end of the Steam Wand. Push up against the Stopper shown above.
   
   
   Wand may be hot. Risk of scalding.
3. Use 75-200ml of cold semi-skimmed milk in a stainless steel jug. Position the head of the Froth Nozzle just under the surface of the milk. Risk of scalding.
   
4. Turn the Steam Flow Control slowly between the 'off' and the 'steam / water' position to adjust the flow of steam. You will hear the pump operating; this is quite normal. Risk of scalding.
   
5. To heat milk using steam, leave the Steam Wand positioned just under the surface of the milk. Do not move the jug. Risk of scalding.
   
6. To froth milk, introduce air to the milk by slowly lowering the jug ensuring the Nozzle remains under the surface of the milk. Risk of scalding.
   

WHEN SWITCHING FROM STEAM TO COFFEE OR TEA EXTRACTION: WAIT 10 SECONDS BEFORE REMOVING THE HOLDER AFTER DOSING FIRST DRINK IS COMPLETE.

7. To stop steaming, turn the Steam Flow Control to the 'off' position. Press any button to exit the steam function. The Pump will operate to reduce the temperature to optimum coffee temperature.
   
8. 
   After each use, flush the Steam Wand by dispensing water or steam to remove any milk residue from inside the Steam Wand. Wipe the Steam Wand.
   
9. Turn machine off by pressing the Power ON/OFF Switch after you have rinsed through and finished using the machine. This will save energy. Unplug when not in use.
   

DISPENSING HOT WATER

WATER WILL BE HOT AND BE DISPENSED AT HIGH PRESSURE. SUBMERGE THE WAND TO REDUCE SPLASHING.

1. Remove the Froth Nozzle from the Steam Wand.
   

Wand may be hot. Ensure the Water Tank is filled with water.

2. Insert into a deep jug or teapot and point the Wand to a side wall to reduce splashback.
   
3. Turn the Steam Flow Control to the steam/water position. It will start with a continuous flow then start to pulse. This is normal. Risk of scalding.
   
4. The flow of water can be adjusted by turning the Steam Flow Control between the 'off' and the 'steam/water' position. Risk of scalding.
   
5. To stop the flow, turn the Steam Flow Control to the 'off' position. Be careful not to overtighten.
   
6. Turn machine off by pressing the Power ON/OFF Switch after you have rinsed through and finished using the machine. This will save energy. Unplug when not in use.
   

STANDBY MODE

1. If the machine is left idle for 30 minutes, it will enter standby mode. The Auto Dosing Buttons illumination will turn off along with the Thermobloc Heater, to save energy.
   
2. Press button 'ON'. The Auto Dosing Buttons will flash. The Thermobloc is now heating the water.
   
3. The Auto Dosing Buttons will turn solid once the temperature is correct for extraction.
   

ADVANCED FEATURES

AUTO START

The Auto Start feature allows you to pre-select your dose. Once heated up it will automatically dispense your drink. If you like your drink extra hot, prime before use.

1. SET UP HOLDER
   Select your prefered coffee or tea and attach Filter or NX Holder.
2. Set the power switch to 'ON'. The lights will flash. Press the desired Auto Dosing Button. The selected button will continue to flash.
   
3. The light will go solid once the Thermobloc is at the correct operating temperature and automatically dispense coffee or tea.
   

DOSING MEMORY

The Auto Dosing Buttons can be programmed to fill your desired cup size.

1. Press & hold the relevant Auto Dosing Button until the Pump starts (approx 5 seconds).The machine will start to dispense. Press the same button again when the desired amount of beverage has been dispensed.
   
2. Your preference is now saved. The machine remembers this dispense volume, so the next time the button is pressed the same amount of beverage is dispensed.
   

TEMPERATURE BOOST

The temperature boost feature allows you to increase or decrease the temperature of the Auto Dosing Buttons. Tea settings are hotter than coffee settings. For the coffee buttons, each light indicates an increment of 3°C, and for tea each light indicates an increment of 5°C

1. Ensure the machine is switched on and the Auto Dosing Buttons are illuminated, but not flashing. Hold down your chosen Auto Dosing Button and Steam Button for 5 seconds and release.
   
2. The flashing button indicates the previously set temperature. One light flashing indicates it is set to the coolest temperature.
   
3. All lights illuminated with the Steam Button flashing indicates it is set to the hottest temperature
   
4. Press your selected Auto Dosing Button repeatedly to scroll through the temperature options (from high to low) until you reach your desired setting.
   
5. Press the Steam Button to save the temperature setting.
   

CLEANING - AFTER EACH USE

BEFORE CLEANING, MAKE SURE THE MACHINE IS SWITCHED OFF, UNPLUGGED AND ALLOWED TO COOL.

NOTE: ALWAYS CLEAN YOUR MACHINE BEFORE BEGINNING THE DESCALING PROCESS.

Do not wash any of the plastic accessories in a dishwasher.

1. Dishwasher Filters & Froth Nozzle on wash cycle below 40°C. Put on top rack only & remove prior to drying cycle. Do not wash any other parts in the dishwasher.
   
2. Empty the Drip Tray regularly. If the 'Tray Full' indicator is visable, empty immediately. Remove the Non-Slip Mat and rinse after each use.
   
3. Wash Holders under running water to remove any dried coffee. Do not wash in the dishwasher.
   
4. After each use, clean the Wand with a damp cloth. There should be no milk residue visible.
   
5. 
   After each use, flush the Steam Wand by dispensing water or steam, this will remove any milk residue from inside the Steam Wand. Risk of scalding.
   
6. Empty and rinse out after each session and refill with fresh water just before you make your next round of espresso.
   

CLEANING - MONTHLY

BEFORE CLEANING, ENSURE THE MACHINE IS SWITCHED OFF, UNPLUGGED & ALLOWED TO COOL. USE COFFEE CAPSULES OR ESE PODS TO REDUCE FREQUENCY OF CLEANING.

1. Wipe the entire Brewhead area and ensure it is completely free of coffee grounds. Fine coffee grounds can block the Showerhead.
   
2. Using a screwdriver and hammer, GENTLY tap the screw to dislodge any dried coffee. Then unscrew anti-clockwise.
   
3. Thoroughly clean the Showerhead and Gasket to remove any coffee grounds. Use the Filter Pin to unblock or rinse in suds.
   
4. Filters often get blocked with prolonged use. To unblock, use the Filter Pin and push through the central hole on both sides of the Filter to unblock.
   
5. The Filter Plate on the NX Adaptor can get blocked with dried coffee. To unblock the holes, use the Filter Pin to clean between the holes.
   
6. Locate the Measuring Spoon onto the Steam Wand nut. Unscrew anti-clockwise and remove.
   

MAINTENANCE

Kilrock Espresso & Coffee Machine Descaler

A build-up of limescale can cause your coffee machine to stop working. Dualit recommends descaling at least once a month and more regularly in hard water areas, to prevent limescale build up in your coffee machine. The descale cycle will take approximately 45 minutes to complete. Each box includes two descale treatments.

OSCAR Water Softening Bags

A build-up of limescale is one of the most common causes of coffee machine break downs. OSCAR Water Softening Bags (OSCAR Bags) are placed in your coffee machine's water tank and work to soften the water, reducing limescale build-up. The OSCAR Bags are suitable for all Dualit Pump Espresso Coffee Machines with Water Tanks.

For more information, visit our website www.dualit.com/machine-care.

DESCALE REGULARLY

HARD WATER WILL CAUSE LIMESCALE BUILD-UP, RESULTING IN BLOCKAGES THAT CAUSE PERMANENT DAMAGE.

PRODUCT FAILURE DUE TO THE BUILD UP OF LIMESCALE IS NOT COVERED BY GUARANTEE.

Dualit recommends descaling regularly, in a well-ventilated area to prevent limescale build up in the machine. See limescale warning for frequency in your area in accordance with the hardness of your water. It is essential that a compatible descaler is used - visit www.dualit.com for descaler options. The descale process takes approximately 30 minutes.

AVOID CONTACT WITH DESCALING SOLUTION. STEAM RELEASED DURING DESCALE PROCESS MAY BE HARMFUL. RISK OF SCALDING AND INJURY.

1. Ensure your descaling product is suitable for coffee machines; follow descaling product instructions carefully. If you are using a water softener, ensure water softener is removed before adding descaler. Fill Water Tank with the descaling solution.
   
2. Place the Holder most frequently used into the machine, ensuring it is empty. If both Holders and Filters are used frequently, cycle between them. Do not soak the Holders in descale solution. Ensure they are rinsed thoroughly after descaling.
   
3. Place a container with a capacity of more than 1 litre on the Drip Tray underneath the Holder.
   
   
   Do not remove the Drip Tray.
   Remove Froth Nozzle from the Steam Wand. Direct Steam Wand into container.
4. Insert Water Tank. Plug machine in and turn on. Wait until machine has reached operating temperature.
   
   
   Keep hands away from Steam Wand at all times. Risk of scalding.
5. Ensure Steam/Water Selector is set to water. Turn dial completely to the right to dispense half a tank of water through the Steam Wand. Risk of chemical inhalation. If no water comes out, allow to stand for 5 minutes and repeat above, allowing the pump to run for up to 1 minute even if no water dispenses. Turn dial fully to the left and allow the remaining descale solution to dispense from the Showerhead, not allowing the tank to run dry. Risk of chemical inhalation. Turn dial to 'Off'.
   
6. Thoroughly rinse Water Tank and fill with fresh water. Repeat steps 2-5 twice with water only to remove any traces of descaling solution. If you are using a Water Softener, ensure that it is replaced into the Water Tank once the Water Tank is clean. Risk of chemical ingestion.
   

EcoPress™ your used aluminium capsules to separate the coffee from the capsule for easy kerbside recycling. Available to purchase from www.dualit.com/ecopress

IMPORTANT SAFETY PRECAUTIONS

READ ALL INSTRUCTIONS
BEFORE USING THE COFFEE MACHINE. KEEP THESE INSTRUCTIONS FOR FUTUREREFERENCE.

IMPORTANT SAFEGUARDS

• THIS IS AN ATTENDED APPLIANCE. Do not leave unattended during use, unplug after each use (risk of fire if an unattended appliance is left operating).
• This appliance must not be used by children younger than 8 years old or persons with very extensive and complex disabilities. Children aged 8-14 years and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge shall not use this appliance, unless they are supervised and have been given instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children less than 8 years old.
• This appliance is intended for indoor household use only. If the appliance is used improperly or for professional or semi-professional purposes or if it is not used according to these instructions the Guarantee becomes invalid and Dualit refuses any liability for damage caused.

Electrical safety

• Ensure that the voltage of the appliance corresponds to that of the mains supply. Risk of electric shock and fire.
• 
  This appliance must be earthed.
• In order to avoid a hazard, if the Power Cord is damaged it must, for safety reasons, be replaced by Dualit or a qualified electrician. Call Dualit's Customer Helpline on +44 (0)1293 652 500. Risk of electric shock and fire.
• Never touch the Power Cord with wet hands. Risk of electric shock.

• Do not pull the Power Cord over sharp edges, clamp it or allow it to hang down. It should not be allowed to come into contact with hot or damp surfaces. Risk of electric shock.
• This appliance conforms to directive 2014/30/EU regarding electromagnetic compatibility.
• The use of extension cables not authorised by the manufacturer may cause damage or accidents. Risk of electric shock.

General safety

• Do not operate any appliance with a damaged Power Cord or plug, or after the appliance malfunctions or has been dropped, damaged or cracked in any manner. Risk of electric shock and fire.
• The use of accessory attachments not recommended by Dualit may result in fire, electric shock or injury to persons.
• The appliance's plug must fit into the mains socket properly. Do not alter the plug. Do not use plug adaptors. Risk of electric shock.
• Never use the plug without the fuse cover fitted. Ensure replacement fuse is the same current value as the original. Replacement fuses are available and should be ASTA approved to BS1362. Risk of electric shock and fire.
• Do not use the appliance without water as this may cause damage to the Pump/Boiler.
• Do not touch the metal parts, the Filter Holder or its housing when the appliance is in use. Risk of burns or scalding.
• Do not place the appliance on a polished wood or permeable surface, it could damage the surface.
• Do not place the Coffee Machine on a metal tray or other metal surface during use. Risk of electric shock.
• Do not operate on an uneven surface. Risk of injury.
• Do not place the appliance over or close to sources of heat such as electric rings, hot ovens or open flames. Risk of electric shock and fire.
• Do not leave the appliance in a room with a temperature below 0°C, as any water remaining in the appliance could freeze and cause damage.
• Before refilling the Water Tank, unplug the appliance from the mains. Risk of electric shock.
• Do not overfill the Water Tank.
• Do not use sparkling water (with carbon dioxide).
• Never fill the Tank with hot or boiling water.
• Only use the appliance with the drip tray correctly fitted.

• Do not immerse in water or other liquids. Risk of electric shock and fire.
• If there is internal water leakage, do not operate the coffee maker and unplug it at once in order to avoid electric hazard. Risk of electric shock.
• Turn the appliance off and unplug when not in use. Risk of electric shock and fire.
• To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use a soft cloth and a mild detergent.
• Do not use a scouring pad or abrasive cleaner on the main body.
• Do not place on a tray or surface that may collect liquid. Risk of electric shock.
• Steam and hot water hazard. Do not come into direct contact with hot liquid and steam. Risk of scalding.
• Do not lift the appliance up using the water tank, Power Cord or Cup Rails. Only hold the appliance body. Unplug and allow to cool prior to moving.
• The Power Cord should not be allowed to come into contact with hot surfaces. Risk of fire.
• A short Power Cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. Risk of injury and electric shock.
• Never use a damaged or deformed capsule. Water could flow around the capsule when not perforated by the blades and damage the appliance. Risk of scalding.
• We recommend that the appliance is plugged into a socket that has no other appliance connected to it. Failure to do this may cause an overload, trip a circuit breaker or blow a fuse. Preferably the socket outlet should be protected by a residual current device (RCD).
• Do not come into contact with the Grouphead, Filter, Holder Body, coffee outlets or Steam Wand. The surface will be hot. Use Filter Holder Handle only. Risk of scalding.
• Unplug the appliance from the mains to allow to cool before cleaning, maintaining or moving.
  Hot water. For details, please refer to cleaning section. Risk of fire, electric shock, scalding or injury to persons.
• The appliance is not designed for commercial or industrial use; it is for domestic use only.
• Caution when using Milk Jug as edges may be sharp. Risk of injury.

Documents / Resources

References

• Register A Dualit Product
• Dualit — Award winning toasters, kettles, coffee & more
• Dualit Aluminium Coffee Pods — Nespresso Compatible
• Dualit Cups — High-Quality Bone China for Every Coffee Lover
• Dualit Nespresso-Compatible Coffee Pods For Perfect Brews
• EcoPress Coffee Pod Recyclers — Mess-Free Recycling
• Dualit — Award winning toasters, kettles, coffee & more
• Dualit Aluminium Coffee Pods — Nespresso Compatible
• Dualit Coffee Accessories & Care Products

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Dualit Espress-Auto - Coffee and Tea Machine Manual