SMART 6000S Series User Manual page 51

Chapter 4
Connecting computers and other devices
Setting a connected computer's resolution and refresh rate
This table presents the recommend resolutions and refresh rates for the display's inputs:
Input source
HDMI 1
HDMI 2
HDMI 3
VGA
USB Type-C
If possible, set connected computers to these resolutions and refresh rates. See the computers' operating
system documentation for instructions.
Using recommended cables
SMART recommends the following varieties of cable:
Cable type Maximum length
HDMI 23' (7 m)
VGA 23' (7 m)
Stereo 3.5 mm 20' (6 m)
USB 2.0 16' (5 m)
1
The performance of cables longer than 23' (7 m) is highly dependent on the cable's quality.
smarttech.com/kb/171415
Resolution
3840 × 2160
3840 × 2160
3840 × 2160
1920 × 1080
3840 × 2160
Recommendation
1
Use only certified premium high-speed HDMI cables that
have been tested to support the performance standard
you require.
Use VGA cables with all pins in their connectors fully
populated and wired.
[N/A]
Use a USB extender if the distance between the
computer and the display is greater than 16' (5 m). For
more information, see USB extenders on page 20.
USB 2.0 cables support Hi-Speed (480 Mbps), whether
connected to a USB 2.0 or USB 3.0 receptacle. For
SuperSpeed (5 Gbps), connect a USB 3.0 cable to a USB
3.0 receptacle.
Refresh rate
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
51