Connecting Optional Components; Connecting Optional A/V Components - Sony DHC-MD373 Operating Instructions Manual

Connecting optional
components
Connecting optional A/V
components
To enhance your system, you can connect optional
components. Refer to the operating instructions of
each component.
Connecting the audio cords (not
supplied)
When using audio cords (not supplied) to connect
other A/V components to the system, make sure to
insert the plugs firmly, pushing them in all the
way. No sound will be produced if the plugs are
not inserted securely.
Connecting a portable MD,
etc.
Connect a portable MD, etc., to the LINE IN jack
on the front panel of the unit, using an audio
connecting cord (not supplied).
`/1
Portable MD,
etc.
52
Not pushed in all the way
N.G.
OK
Insert completely
x
Z HS
HS
Z x
z
. m M >
Stereo mini-
plug
Audio connecting
cord
Connecting the optional TC-
TX373 tape deck
CD Synchro Recording and Timer Recording are
possible when the TAPE CONTROL jacks are
connected.
Refer to the operating instructions included with
the TC-TX373 tape deck for details.
TAPE CONTROL jack
Tip
A
The and B markings of the TAPE IN/OUT jacks
guide you to connect the optional TC-TX373 tape
deck.
Connecting another tape deck
Connect a tape deck to the TAPE IN and OUT
jacks on the rear panel of the unit, using audio
connecting cords (not supplied).
Tape deck
To the audio To the audio
input of a output of a
tape deck tape deck
TAPE IN
TAPE
jacks
OUT jacks
System cable
adaptor