Making A Space Between Tracks; Seconds Long - Smart Space - Sony DHC-MD373 Operating Instructions Manual

6
Press MENU/NO.
7
Press MD HS.
Recording starts.
To stop recording
Press MD x.
To cancel automatic track
marking
1 Press MENU/NO on the remote during
recording pause. "Setup ?" appears, then press
ENTER/YES on the remote.
2 Press . or > on the remote repeatedly
until "T.Mark LSync" appears, then press
ENTER/YES.
3 Press . or > repeatedly until "T.Mark
Off" appears, then press ENTER/YES.
4 Press MENU/NO.
"LEVEL-SYNC" disappears.
When "LEVEL-SYNC" is off, a track number is
marked only at the beginning of each recording.
Marking track numbers at a
specific point during
recording
— Track Mark
You can mark track numbers at any time during
recording, regardless of the type of sound source.
`/1
, Press z REC during recording at the
point you want to add a track mark.
The tracks following the added one are
renumbered.
Z HS x
Z HS x
z
. m M >
z REC
Making a space
between tracks 3
seconds long
The Smart Space function lets you make the blank
spaces between tracks 3 seconds long
automatically while making a digital recording
from a CD. For other types of recording, if the
Smart Space function is on and there is no sound
input for about 3 seconds or more (but less than 30
seconds) while recording, the MD deck replaces
this silence with a blank of about 3 seconds and
continues recording.
No sound input for less than 30 seconds
Off
On
Replaced with a blank of 3 seconds and
recording continues
Auto Cut: When the Smart Space function is on,
if there is no sound input for 30 seconds or more,
the MD deck replaces this silence with a blank of
about 3 seconds and enters recording pause.
No sound input for 30 seconds or more
Off
On
Replaced with a blank of 3 seconds and
recording pauses
— Smart Space
continued
31