Recording From The Radio; Manual Recording - Sony DHC-MD373 Operating Instructions Manual

Listening to the radio
(continued)
To
Turn off the radio
Adjust the volume
To select the preset number
using the remote
Press the numeric buttons on the remote in step 3.
To enter preset numbers 10 or over, press >10 and
the preset number. To enter 0, use the 10/0 button.
Listening to non-preset radio
stations
• Press TUNING MODE repeatedly until
"MANUAL" appears in step 2, then press
TUNING + or – to tune in the desired station
(Manual Tuning).
• Press TUNING MODE repeatedly until
"AUTO" appears in step 2, then press TUNING
+ or –. The frequency indication changes and
the scanning stops when the system tunes in a
station (Automatic Tuning).
To cancel Automatic Tuning
Press TUNING MODE.
Tips
• Pressing TUNER/BAND when the system is off
automatically turns on the system and tunes in the
last received station (One Touch Play).
• You can switch from another source to the tuner
just by pressing TUNER/BAND (Automatic
Source Selection).
• To improve broadcast reception, adjust the supplied
aerials, or connect a commercially available
external aerial (see page 53).
• When an FM stereo programme has static noise,
press STEREO/MONO until "MONO" appears.
There will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.
14
Do this
Press ?/1 to turn off the
system.
Turn VOLUME.
Recording from the
radio

— Manual Recording

You can analog record a radio programme on an
MD. If you use a partially recorded MD, recording
starts after the recorded tracks. To erase the
recorded contents, see "Erasing recordings" on
page 37.
To turn on the system, press ?/1 (power).
?/1 (power)
MD Z
MD indicator
`/1
3
1
Insert a recordable MD.
With the arrow
pointing toward
the deck
With the label
side up, and the
shutter on the
righthand side
2
Press TUNER/BAND to select "FM" or
"AM".
3
Press TUNING MODE repeatedly until
"PRESET" appears.
6
MD x
Z HS x
Z HS x
z
. m M >
5 2 4
z
. m M >