Table of Contents
Advertisement
Timer recording radio
programmes (continued)
To check the timer
Select the timer number (REC 1 to 3) in step 2 of
"To activate/cancel the timer", then press ENTER/
YES.
The last setting appears.
Tip
When you record from the radio, the station name
(see page 55, or frequency when the station is not
labelled), the start time and the stop time are
automatically recorded on the MD.
Notes
• You cannot activate the Daily Timer and the
recording timer at the same time.
• Do not operate the system from the time the system
turns on until the recording starts (about 30 seconds
before the preset time).
• When you record on a brand new MD, the first 15
seconds are not recorded.
• The volume is reduced to minimum during
recording.
• If you use another component, you must set the
timer on both systems to the same time. You cannot
activate the component with this system's timer.
60
Connecting optional
components
Connecting optional A/V
components
To enhance your system, you can connect optional
components. Refer to the operating instructions of
each component.
Connecting the audio cords (not
supplied)
When using audio cords (not supplied) to connect
other A/V components to the system, make sure to
insert the plugs firmly, pushing them in all the
way. No sound will be produced if the plugs are
not inserted securely.
Not pushed in all the way
Insert completely
N.G.
OK
Advertisement
Table of Contents
