Moving Recorded Tracks; Move Function - Sony DHC-MD373 Operating Instructions Manual

Erasing recordings (continued)
8
Press ENTER/YES if point A is correct.
"Point B Set" appears and playback for
setting the ending point of the portion to be
erased (point B) starts.
9
Continue playback until the deck
reaches point B, then press ENTER/
YES.
"A-B Ers" and "Point B ok?" appear
alternately and the deck repeats a portion of
the few seconds before point A and after
point B successively.
10
Press . or > repeatedly to find
point B.
The procedure is the same as step 6.
11
Press ENTER/YES if point B is correct.
"Complete !!" appears for a few seconds and
the portion between point A and B is erased.
To cancel A-B Erase
Press MENU/NO.
Note
If "Impossible" appears, the specified portion cannot
be erased. This happens when you have edited the
same track many times. This is due to a technical
limitation of the MD system and is not a mechanical
error.
40

Moving recorded tracks

— Move Function

You can use this function to change the order of
any track on the disc. When you move tracks, the
tracks are automatically renumbered.
E.g.: Moving track 3 to position 2.
Track
number
1 2
Original
A B
tracks
2
1
After
A
MOVE
2
m
3,4,5
.
X
1
1
Press MD to switch the function to MD.
2
Press MENU/NO to display "Edit
Menu".
3
Press . or > repeatedly until
"Move ?" appears, then press ENTER/
YES.
3 4
C D
3 4
C B D
`/1
3,4,6
M
3,4,5
>
H
x